Important Safety Instructions

Safety	2

SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation, operation, and maintenance of the product. Save this manual for future reference.

This is the safety alert symbol. When you see this symbol on your pump or in this manual, look for one of the following signal words and be alert to the potential for personal injury!

indicates a hazard which, if not avoided, will result in death or serious injury.

indicates a hazard which, if not avoided, could result in death or serious injury.

indicates a hazard which, if not avoided, could result in minor or moderate injury.

NOTICE addresses practices not related to personal injury.

Carefully read and follow all safety instructions in this manual and on pump..

Keep safety labels in good condition.

Replace missing or damaged safety labels.

Electrical Safety

Capacitor voltage may be hazardous.. To discharge motor capacitor, hold insulated handle screwdriver BY THE HANDLE and short capacitor terminals together. Do not touch metal screwdriver blade or capacitor terminals. If in doubt, consult a qualified electrician.

General Safety

Do not touch an operating motor. Modern motors are designed to operate at high temperatures. To avoid burns when servicing pump, allow it to cool for 20 minutes after shut-down before handling.

Do not allow pump or any system component to freeze. To do so will void warranty.

Pump water only with this pump.

Periodically inspect pump and system components. Wear safety glasses at all times when working on pumps.

Keep work area clean, uncluttered and properly lighted; store properly all unused tools and equipment.

Keep visitors at a safe distance from the work areas.

Pump body may explode if used as a booster pump unless relief valve capable of passing full pump flow at 75 psi is installed.

WARNING

Hazardous voltage. Can shock, burn, or cause death.

Ground pump before connecting to power supply. Disconnect power before working on pump, motor or tank.

Wire motor for correct voltage.. See “Electrical” section of this manual and motor nameplate..

Ground motor before connecting to power supply..

Meet National Electrical Code, Canadian Electrical Code, and local codes for all wiring..

Follow wiring instructions in this manual when connecting motor to power lines..

WARNING

Hazardous pressure! Install pressure relief valve in discharge pipe.

Release all pressure on system before working on any component.

For parts or assistance, call Simer Customer Service at 1-800-468-7867

2.81E+01 specifications

Simer Pumps has long been a reputable name in the pump manufacturing industry, and one of their notable offerings is the Simer Pumps 2.81E+01 model. This advanced pump is designed for a variety of fluid handling applications, providing efficiency and reliability that can meet the demands of both residential and commercial environments.

One of the primary features of the Simer Pumps 2.81E+01 model is its robust construction, ensuring durability and longevity even under challenging conditions. This pump is built with high-quality materials that resist corrosion and wear, making it suitable for applications involving water, chemicals, and other fluids. The durability of the pump minimizes maintenance requirements and reduces the total cost of ownership over its operational lifespan.

Technology plays a vital role in the performance of the Simer Pumps 2.81E+01. It is equipped with a powerful motor that delivers excellent flow rates while maintaining energy efficiency. The pump design incorporates advanced hydraulic principles that optimize performance, making it capable of handling a wide range of fluid volumes without sacrificing efficiency. This ensures that users can rely on consistent performance, whether it's for irrigation, drainage, or industrial processes.

Another noteworthy characteristic of the Simer Pumps 2.81E+01 is its versatility. The pump is designed with adaptability in mind; it can be utilized in various settings, including residential basements for dewatering, agricultural applications for irrigation systems, and light industrial uses. Its multi-purpose capability makes it an attractive option for a wide array of users who require flexibility in their pumping solutions.

Furthermore, the Simer Pumps 2.81E+01 features ease of installation and operation. The user-friendly design includes straightforward connection points and clear instructions, allowing for quick setup and minimal downtime. Its maintenance-friendly design enables users to perform routine checks and necessary repairs without excessive complication.

In summary, the Simer Pumps 2.81E+01 is a robust, efficient, and versatile pumping solution that caters to various fluid handling needs. With its durable construction, powerful motor, adaptable design, and user-friendly features, it stands out as an excellent choice for both residential and commercial applications. Whether for dewatering, irrigation, or industrial use, this model delivers reliable performance that meets the demands of modern fluid management.