Harbor Freight Tools 91130 operating instructions See Figures K and P, To Adjust The Depth Of Cut

9.Make sure to insert the shaft of the router bit all the way into the Collet (18D, 24D). (See Figure P.)

10.Tighten the Collet Nut (19D) by pulling and holding the Spindle Lock Lever (22E) forward while screwing the Collet Nut in a clockwise direction.

(See Figures K and P.)

ROUTER BIT

(NOT INCLUDED)

ROUTER BIT

COLLET

NUT

(19D)

FIGURE P

11.Replace the Collet Assembly Cover (15D). (See Figure N.)

12.Adjust the depth of cut to the desired depth by turning the Height Adjustment Ring (14D). Then, use the Height Adjustment Lock (23D) to lock the setting in place. NOTE: Make sure the Height Adjustment Lock is aligned in a locking position and that the router bit is firmly secured. (See Figure N.)

To Adjust The Depth Of Cut:

1.Loosen the Height Adjustment Lock (23D) by turning it in a counterclockwise direction, using the Wrench (21D) provided. (See Figure Q.)

WRENCH
(21D)		ADJUSTMENT
			TOOL
HEIGHT				(27D)
ADJUSTMENT		ADJUSTMENT
LOCK
			BOARD
(23D)
				(17D)
	FIGURE Q

SKU 91130 For technical questions, please call 1-800-444-3353. Page 20