Harbor Freight Tools 91130 To Turn On The Router Table, To Operate The Router Table

SAFETY COVER

(10B)

VARIABLE

SPEED ADJ.

(28B)

KEY (8B)

POWER SWITCH

(9B)

FIGURE U

To Turn On The Router Table:

1.Connect the Power Cord/Plug (1B) to the nearest grounded, 120 volt, electrical outlet.

2.Depress the Key (8B), and lift up on the Safety Cover (10B). Then, depress the Power Switch (9B) to its “ON” position. (See Figure U.)

3.To turn off the Router Table, simply depress the Safety Cover (10B) to snap it shut. This pushes the “OFF” button underneath the Safety Cover and cuts off the power. (See Figure U.)

4.To lock the Power Switch (9B) and prevent unauthorized use, close the Safety Cover (10B) and remove the Key (8B) by pulling it out. Make sure to store the Key in a safe location out of reach of children. (See Figure U.)

To Operate The Router Table:

1.Insert and secure the desired Collet (18D, 24D) and router bit.

2.Make all necessary adjustments to the Router Table.

3.Make sure the Power Switch (9B) is in its “OFF” position. Then, connect the Power Cord/Plug to the nearest grounded, 120 volt, electrical outlet.

4.Depress the Power Switch (9B) to its “ON” position.

SKU 91130 For technical questions, please call 1-800-444-3353. Page 24