FEIN Power Tools WPO14-25E, WPO14-15E For your safety, General Safety Rules, 1Work area safety

Page 3

3 41 01 130 21 0.book Seite 3 Freitag, 18. Dezember 2009 7:47 07

en 3

For your safety.

WARNING Read all safety warnings and all instructions. Failure to fol-

low the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

Do not use this power tool before you

have thoroughly read and completely understood this Instruction Manual, including the figures, specifications, safety regulations and the signs indicating DANGER, WARN- ING and CAUTION.

Only carry out such operations with this power tool as intended for by FEIN. Only use application tools and accessories that have been released by FEIN.

Please also observe the relevant national industrial safety regulations.

Non-observance of the safety instructions in the said documentation can lead to an electric shock, burns and/or severe injuries.

This Instruction Manual should be kept for later use and enclosed with the power tool, should it be passed on or sold.

SAVE THESE INSTRUCTIONS.

General Safety Rules.

1)Work area safety

a)Keep work area clean and well lit. Clut- tered or dark areas invite accidents.

b)Do not operate power tools in explosive at- mospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c)Keep children and bystanders away while operating a power tool. Distraction can cause you to lose control.

2)Electrical safety

a)Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b)Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an in- creased risk of electric shock if your body is earthed or grounded.

c)Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d)Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of elec- tric shock.

e)When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use re- duces the risk of electric shock.

3)Personal safety

a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alco- hol or medication. A moment of inatten- tion while operating power tools may re- sult in serious personal injury.

b)Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c)Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents USA Français Mode demploi Español Instrucciones de uso 3Personal safety For your safetyGeneral Safety Rules 1Work area safety4Power tool use and care Special safety instructionsKickback and related warnings Further safety warnings Safety warnings specific for sanding operationsSafety Warnings specific for Polishing operations Safety warnings specific for wire brushing operationsProvide for good ventilation of the work- place Handling hazardous dustsHand/arm vibrations 100 150 Extension cord10 en Intended use of the power toolSymbols Operation of the power tool off power generatorsSymbol Explanation Or fatal injuryDB, min, m/s2 Tional system of units SI 12 en Technical description and specificationsAssembly instructions Mounting the gear housing cover FigureMounting the auxiliary handle Figure Mounting the polishing tool Figure Switching on and OFF FigureChanging the tool Working instructionsSecuring the work piece Setting the speed FigureCleaning MaintenanceWarranty and liability ServiceAuxiliary handle Allen key Provided Accessories Figure18 en Selection of accessories Figures41 01 130 21 0.book Seite 19 Freitag, 18. Dezember 2009 747 20 en WPO14-15E 22 en Pour votre sécurité 1Place de travail2Sécurité relative au système électrique 4Utilisation et emploi soigneux de l’outil élec- troportatif 24 frInstructions particulières de sécurité Service26 fr Rebonds et mises en garde correspondantesConsignes de sécurité supplémentaires Veillez à bien aérer la zone de travail Maniement de poussières nocives28 fr ’amiante et les matériaux contenant de l’amianteLégers peuvent causer une auto-inflammation ou une explosion Vibrations mains-brasCâble de rallonge 30 fr11,5 Reuse SymbolesConception de l’outil électrique Phique ci-contreHz, N, C, dB Min, m/s2 Symbol ExplicationQui peut entraîner de graves blessures ou la mort Produit avec double isolation ou isolation renforcéeDescription technique et spécification 34 fr Indications de montageMontage de la poignée supplémentaire Figure Montage du capot de la poignée FigureBouton de Changement d’outilIndications pour le travail Montage de l’outil de polissage FigureRéglage de la vitesse de rotation Figure Bloquer la pièce à travailler36 fr Nettoyage Service après-venteEntretien Garantie38 fr Accessoires fournis FigureChoix d’accessoires voir figures 8 40 fr 41 01 130 21 0.book Seite 41 Freitag, 18. Dezember 2009 747 42 fr 41 01 130 21 0.book Seite 43 Freitag, 18. Dezember 2009 747 No utilice esta herramienta eléctrica sin Para su seguridadInstrucciones generales de seguridad 44 es5Servicio 46 es Instrucciones de seguridad especialesCausas del rechazo y advertencias al respecto 48 es Instrucciones de seguridad específicas para el pulidoInflamarse o provocar una explosión Tratamiento de materiales en polvo peligrosos50 es Vibraciones en la mano/brazoFt/s2 11,5 Inseguridad K, Cables de prolongaciónSymbole Utilización reglamentaria de la herramienta eléctrica52 es Lesionarse Simbolo DefiniciónMortal Tar lesiones graves o mortalesDescripción técnica y especificaciones 54 esSentarse en caso de una puesta en marcha involuntaria Cubierta Tornillo Instrucciones de montajeMontaje de la empuñadura adicional Figura Montaje de la cubierta de agarre FiguraConexión y desconexión Figura Cambio de útilInstrucciones para la operación Montaje del accesorio para pulir FiguraSujeción de la pieza de trabajo Ajuste de las revoluciones FiguraServicio técnico MantenimientoGarantía Protección del medio ambiente, eliminaciónEmpuñadura adicional Llave allen Palanca de fijación rápida Figura60 es Accesorios disponibles ver figuras 841 01 130 21 0 ES US Seite 61 Freitag, 18. Dezember 2009 837 62 es 41 01 130 21 0 ES US Seite 63 Freitag, 18. Dezember 2009 837 64 es

WPO14-25E, WPO14-15E specifications

FEIN Power Tools, renowned for their precision and quality, offers two remarkable angle grinders: the WPO14-15E and WPO14-25E. These tools are designed for both professional tradespeople and DIY enthusiasts, providing exceptional performance and durability in a variety of applications.

The WPO14-15E is powered by a robust 1500-watt motor that delivers outstanding grinding and cutting capabilities. Its lightweight design, coupled with an ergonomic handle, ensures user comfort during prolonged use. The variable speed control allows for optimal adjustment in relation to the material being processed, making it suitable for a wide range of tasks, from metalworking to masonry.

One of the standout features of the WPO14-15E is the integrated anti-vibration technology, which significantly reduces hand-arm vibrations. This not only enhances user comfort but also extends tool life by minimizing wear and tear. Additionally, the tool's protective guard can be adjusted without the need for tools, allowing for quick and easy modifications to suit specific jobs.

On the other hand, the WPO14-25E takes performance to the next level with a powerful 2500-watt motor, making it ideal for heavy-duty applications. Its robust construction is designed to withstand the rigors of industrial use, providing both longevity and reliability. The WPO14-25E also features advanced electronic controls, including a speed stabilization system that maintains consistent RPMs under load, ensuring precise results.

Both models share similar design characteristics that emphasize user safety and convenience. The quick-change system for the grinding discs allows for rapid swapping, saving valuable time on the job. Furthermore, the specially designed air intake system ensures efficient cooling, preventing overheating during extended use.

In terms of build quality, FEIN's WPO14-15E and WPO14-25E are equipped with superior materials that resist external damage, enabling them to perform effectively in challenging environments. Their compact size and lightweight design facilitate maneuverability, making them easy to handle even in tight spaces.

In summary, the FEIN WPO14-15E and WPO14-25E angle grinders exemplify high-performance engineering, providing users with exceptional comfort, control, and efficiency. With their advanced technologies and thoughtful features, these tools are an excellent investment for anyone seeking reliable power tools for a variety of grinding and cutting applications. Whether for professional or personal use, FEIN delivers unmatched quality and performance with these outstanding angle grinders.
Top Page Image Contents