DeWalt 31-735 Service, Keep Machine Clean, Lubrication & Rust Protection, Replacement Parts

Page 24

KEEP MACHINE CLEAN

Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

Wear certified safety equipment for eye, hearing and respiratory protection while using compressed air.

FAILURE TO START

Should your machine fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.

LUBRICATION & RUST PROTECTION

Apply household floor paste wax to the machine table, extension table or other work surface weekly. Or use a commercially available protective product designed for this purpose. Follow the manufacturer’s instructions for use and safety.

To clean cast iron tables of rust, you will need the following materials: a sheet of medium Scotch-Brite™ Blending Hand Pad, a can of WD-40®and a can of degreaser. Apply the WD-40 and polish the table surface with the Scotch-Brite pad. Degrease the table, then apply the protective product as described above.

SERVICE

REPLACEMENT PARTS

Use only identical replacement parts. For a parts list or to order parts, visit our website at servicenet.deltamachinery.com. You can also order parts from your nearest factory-owned branch, or by calling our Customer Care Center at 1-800-223-7278 to receive personalized support from highly-trained technicians.

FREE WARNING LABEL REPLACEMENT

If your warning labels become illegible or are missing, call 1-800-223-7278 for a free replacement.

UNGUARDED ROTATING SHAFTS

LOS EJES GIRATORIOS

DES ARBRES TOURNANTS NON

CAN CREATE AN ENTANGLEMENT

DESPROTEGIDOS PUEDEN

PROTÉGÉS PEUVENT PROVOQUER UN

HAZARD WHICH CAN RESULT IN

PRODUCIR UN RIESGO DE ENREDO RISQUE D’ENCHEVÊTREMENT QUI

INJURY. ALWAYS MAKE CERTAIN Y PROVOCAR LESIONES. SIEMPRE

PEUT ENTRAÎNER UNE BLESSURE.

THAT THE SPINDLE COVER IS IN

ASEGÚRESE DE QUE LA CUBIERTA

TOUJOURS S’ASSURER QUE LE CAPOT

PLACE WHEN MACHINE IS NOT

DEL HUSILLO ESTÉ EN SU LUGAR

DE LA BROCHE EST EN POSITION

BEING USED WITH

CUANDO LA MÁQUINA NO SE

LORSQUE LA MACHINE N’EST PAS

ACCESSORIES.

UTILIZA CON LOS ACCESORIOS.

UTILISÉE AVEC DES ACCESSOIRES.

TO REDUCE THE RISK OF INJURY USER MUST READ THE INSTRUCTION MANUAL BEFORE

OPERATING SANDER OR FINISHING MACHINE. ALWAYS WEAR PROPER EYE AND RESPIRATORY

PROTECTION. WHEN OPERATING THIS TOOL, DO NOT WEAR GLOVES, NECKTIES, JEWELRY, LOOSE CLOTHING OR LONG HAIR.

MAINTAIN 1/16” (1.6 MM) MAXIMUM CLEARANCE BETWEEN TABLE AND SANDING BELT OR DISC. KICKBACK HAZARD. REFER

TO MANUAL ON HOW TO AVOID KICKBACKS ON SANDING BELT AND DISC. KEEP HANDS AWAY FROM ABRASIVE SURFACES. ALWAYS

SUPPORT WORKPIECE WITH MITER GAGE, BACKSTOP OR WORK TABLE. DO NOT OPERATE WHILE UNDER INFLUENCE OF DRUGS,

ALCOHOL OR MEDICATION. SHOCK HAZARD. DO NOT EXPOSE TO RAIN OR USE IN DAMP LOCATIONS. DISCONNET MACHINE FROM

POWER SOURCE BEFORE MAKING REPAIRS OR ADJUSTMENTS.

PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL DE

INSTRUCCIONES ANTES DE USAR LA LIJADORA O MÁQUINA DE LIJADO. UTILICE

SIEMPRE PROTECCIÓN RESPIRATORIA Y VISUAL ADECUADA. CUANDO OPERE LA HERRAMIENTA, NO USE GUANTES, CORBATAS,

JOYAS, ROPA HOLGADA NI EL CABELLO LARGO. MANTENGA UNA DISTANCIA MÁXIMA DE 1,6 MM (1/16”) ENTRE LA MESA Y EL DISCO

O LA BANDA DE LIJADO. RIESGO DE RETROCESO. CONSULTE EL MANUAL PARA SABER CÓMO EVITAR LOS RETROCESOS DEL DISCO

Y LA BANDA DE LIJADO. MANTENGA LAS MANOS LEJOS DE LAS SUPERFICIES ABRASIVAS. SOSTENGA SIEMPRE LA HERRAMIENTA

CON UN CALIBRE INGLETADOR O UN TOPE DE RETENCIÓN O SOBRE UNA MESA DE TRABAJO. NO OPERE LA HERRAMIENTA BAJO

LA INFLUENCIA DE DROGAS, ALCOHOL O MEDICACIÓN. RIESGO DE DESCARGA ELÉCTRICA. NO EXPONGA A LA LLUVIA NI UTILICE

EN LUGARES HÚMEDOS DESCONECTE LA MÁQUINA DE LA FUENTE DE ALIMENTACIÓN ANTES DE REALIZAR REPARACIONES O

AJUSTES.

 

POUR RÉDUIRE LE RISQUE DE BLESSURE, L’UTILISATEUR DOIT LIRE LE MODE

 

 

D’EMPLOI AVANT D’UTILISER LA PONCEUSE OU APPAREIL DE PONÇAGE.

TOUJOURS PORTER UNE PROTECTION OCULAIRE ET UNE PROTECTION RESPIRATOIRE ADÉQUATES. LORS DE L’UTILISATION DE

L’OUTIL, NE PAS PORTER DE GANTS, DE CRAVATES, DE BIJOUX NI DE VÊTEMENTS AMPLES; COUVRIR LES CHEVEUX LONGS. MAINTENIR UN DÉGAGEMENT MAXIMAL DE 1,6 MM (1/16 PO) ENTRE LA TABLE ET LA COURROIE ET LE DISQUE ABRASIFS. RISQUE DE REBOND. SE REPORTER AU MODE D’EMPLOI POUR LA PRÉVENTION DE L’EFFET DE REBOND DE LA PONCEUSE À COURROIE ET À DISQUE. ÉLOIGNER LES MAINS DES SURFACES ABRASIVES. TOUJOURS SOUTENIR LA PIÈCE AVEC LE GUIDE D’ONGLET, LA BUTÉE ANTIRETOUR OU LA TABLE DE TRAVAIL. NE PAS UTILISER SOUS L’EMPRISE DE DROGUES, D’ALCOOL OU DE MÉDICAMENT. RISQUE DE CHOC ÉLECTRIQUE. PROTÉGER DE LA PLUIE ET NE PAS UTILISER DANS DES ENDROITS HUMIDES. DÉBRANCHER LA MACHINE DE LA SOURCE D’ALIMENTATION AVANT DE PROCÉDER À DES RÉGLAGES OU À DES RÉPARATIONS.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents 31-735 Table of Contents Important Safety InstructionsSafety Guidelines Definitions General Safety Rules Stay ALERT, Watch What YOU are DOING, and USEAdditional Specific Safety Rules Refer to them often and use them to instruct othersPower Connections Motor SpecificationsGrounding Instructions Extension Cords Minimum Gauge Extension CordCarton Contents Assembly Assembly Tools RequiredAssembly Time Estimate Attaching the Caster Assembly to the Motor CabinetInstalling the Dust Baffle Disconnect the machine from Power sourceInstalling the Dust Collector Intake Hose Attaching the Sanding Unit to the CabinetInstalling the Belt on the Motor Installing the Dust ChuteInstalling the Dust Collector OUT-TAKE Hose Belt Sander TablePage Attaching the Abrasive Disc Operation Attaching the Dust Collector BAGStarting and Stopping the Unit Adjusting the Tension and Tracking of the Sanding Belt Setting the to the Belt Setting the Miter Gauge Slot Parallel to the Sanding BeltSetting the Sanding Disc to the Disc Changing the Position of the Sanding ARMTilting the Disc Sander Table Adjusting the Dust Port Cover Abrasive Belts & Discs Their Selection and USE Surface or Edge Sanding with the Sanding BeltSanding Inside Curves END Sanding with the BeltSanding Outside Curves END Sanding with the Disc Circle Sanding with DiscTroubleshooting Replacing the Sanding BeltReplacing the Sanding Disc Overload ProtectionService Keep Machine CleanReplacement Parts Free Warning Label ReplacementAccessories Service and RepairsPower TAKE-OFF Shaft Warranty Two Year Limited New Product WarrantyLES Instructions Importantes DE Surete Mesures DE Sécurité DéfinitionsLA Proposition DE Californie Règles DE Sécurité Générales Lutilisation DE CET Outil PeutRègles Spécifiques Additionnelles DE Sûreté Conserver CES DirectivesRaccordements Électriques Spécifications DU MoteurInstructions DE Mise À LA Terre Cordon DE Rallonge Mesur Minimum DE Corde D’EXTENSIONDescription Fonctionnelle Contenus DE BoiteAVANT-PROPOS Désemballage ET NettoyageAssemblage Outils Nécessaires Pour L’ASSEMBLEELestimation DE Temps Dassemblee Fixation DE Lensemble DE Roulettes AU Boîtier DU MoteurInstallation DU Déflecteur DE Poussière Installation DU Tuyau Dadmission DU Dépoussiéreur Fixation DE Loutil DE Ponçage AU BoîtierInstallation DE LA Courroie SUR LE Moteur Installation DE LA Goulotte À PoussièreInstallation DU Tuyau DE Sortie DU Dépoussièreur Table DE LA Ponceuse À CourroiePage Fixation DU Disque Abrasif Fonctionnement Démarrage ET Arrêt DE UnitéFixation DU SAC À Poussière Ajuster LA Tension ET Traquer DE LA Ceinture DE Courroie Réglage DE LA Table À 90 PAR Rapport À LA Courroie Modification DE LA Position DU Bras DE LA Ponceuse Inclinaison DE LA Table DE Ponçage À DisqueAdjusting the Dust Port Cover Courroies ET Disques Abrasifs Sélection ET Utilisation Surfaçage OU Ponçage DE Chant À Laide DE LA Bande AbrasivePonçage DES Courbes Intérieures Ponçage DES Courbes ExtérieuresPonçage Dextrémité Avec LE Disque Ponçage DE Cercle Avec DisqueRemplacement DE LA Bande Abrasive Remplacement DU Disque AbrasifDepannage Entretien Protection Contre LES SurchargesRemplacement Gratuit DE Létiquette Garder LA Machine PropreDémarrage Impossible Lubrification ET Protection Contre LA RouilleEntretien ET Réparation Arbre DE Prise DE ForceGarantie Garantie limitée de deux ansInstrucciones DE Seguridad Importantes Pautas DE SEGURIDAD/DEFINICIONESNormas Generales DE Seguridad EL USO DE Esta HerramientaNormas Específicas Adicionales DE Seguridad Guarde Estas InstruccionesConexiones a LA Fuente DE Alimentación Especificaciones DEL MotorInstrucciones DE Conexión a Tierra Cordones DE Extensión Cordón DE Extensión DE Calibre MínimoDescripción Funcional Contenido DE CartonPrologo Desempaquetado Y LimpiezaEnsamblaje Herramientas DE Ensamblaje RequeridasEstimación DEL Tiempo DE Ensamblaje Acople DEL Ensamble DE LA Rueda AL Gabinete DEL MotorInstalación DEL Deflector DE Polvo Acople DE LA Unidad DE Lijado AL Gabinete Instalación DE LA Correa EN EL Motor Instalación DEL Conducto Para PolvoInstalación DE LA Manguera DE Salida DEL Colector DE Polvo Banco Para Lijadora DE BandaPage Instalación DEL Disco Abrasivo Operación Arrancando Y Deteniendo LA MáquinaColocación DE LA Bolsa Recolectora DE Polvo Ajuste DE LA Tension Y Desplace DEL Banda Colocación DEL Banco a 90 Grados DE LA Banda Cambio DE LA Posición DEL Brazo DE Lijado Colocación DEL Banco Para Disco DE Lijar a 90 DEL DiscoInclinación DEL Banco Para Lijadora DE Disco Ajuste DE LA Cubierta DEL Orificio Para Recolección DE Polvo Bandas Y Discos Abrasivos Selección Y USO Lijado DE Superficies O Bordes CON LA Banda DE LijadoLijado DE Curvas Internas Lijado DE Curvas ExternasLijado DE Terminaciones CON EL Disco Lijado Circular CON EL DiscoLocalizacion DE Fallas Reemplazo DE LA Banda DE LijadoReemplazo DEL Disco DE Lijar Protección Contra SobrecargaServicio Accesorios Mantenimiento Y ReparacionesEJE Desmontable Eléctrico Garantia Garantía limitada de dos años para productos nuevos

31-735 specifications

The DeWalt 31-735 is a powerful and versatile tool designed to meet the needs of both professionals and DIY enthusiasts alike. This sturdy machine has gained popularity for its exceptional performance and reliability, making it a top choice for various applications, including woodworking, metalworking, and general construction tasks.

One of the key features of the DeWalt 31-735 is its robust motor, which provides a substantial amount of power for heavy-duty applications. With a high RPM rating, this tool can efficiently tackle demanding tasks, allowing users to work through projects with increased speed and efficiency. The ergonomic design also contributes to its user-friendly nature, providing comfort during extended use, which helps to reduce fatigue.

The DeWalt 31-735 is equipped with advanced technologies that enhance its functionality. One notable feature is its precision cutting mechanism, which ensures accurate and clean cuts every time. The adjustable speed settings allow users to customize the tool's performance based on the material being worked on, providing greater versatility and control.

Another significant characteristic of the DeWalt 31-735 is its durability. Constructed with high-quality materials, this tool is built to withstand the rigors of demanding job sites. Its dust-collection system is designed to minimize debris and maintain a cleaner workspace, enhancing both the user's experience and the longevity of the tool.

The DeWalt 31-735 also boasts compatibility with various attachments and accessories, making it a highly adaptable option for a range of applications. Users can easily switch between different attachments, enabling quick transitions from one task to another without the need for extensive downtime.

Safety is a priority with the DeWalt 31-735, as it is equipped with features like overload protection and safety guards, ensuring that users can operate the machine confidently and securely. Additionally, the tool's solid base provides stability during operation, contributing to increased precision and safety.

In summary, the DeWalt 31-735 stands out as a reliable and efficient tool designed for those who value power, precision, and durability. With its innovative features and user-friendly design, it is undoubtedly an excellent addition to any tool collection, promising to deliver outstanding performance across a wide range of tasks. Whether for professional use or personal projects, the DeWalt 31-735 demonstrates exceptional versatility and reliability.
Top Page Image Contents