DeWalt 31-735 instruction manual Attaching the Sanding Unit to the Cabinet

Page 10

ATTACHING THE SANDING UNIT TO THE CABINET

The belt/disc sander is heavy. Use two or more people to lift the unit to the top of the cabinet.

Disconnect the machine from the power source!

1. Place the sanding unit on top of the cabinet.

NOTE: Insert the sander drive belt through the hole (A) FIG. 11.

2.Place a 5/16" lock washer on a 5/16-18 x 1/2" hex head screw. From inside the cabinet, insert the screw through one of the holes (B) Fig. 11, and into the threaded hole in the sanding unit. Tighten the screw securely.

3.Repeat this process for the three remaining holes (B) Fig. 11.

4.Place a #10 washer on a #10-32 x 3/4" button-head screw. From the inside of the cabinet, insert the screw through one of the holes (C) Fig. 11 in the dust baffle and cabinet and into the threaded hole in the sanding unit. Tighten the screw securely.

5.Repeat for the three remaining holes.

 

 

Fig. 11

 

C

 

B

A

B

 

 

INSTALLING THE DUST COLLECTOR INTAKE HOSE

Disconnect the machine from the power source!

1.Place a hose clamp (A) Fig. 12 on each end of hose

2.Slide one end of hose (B) Fig. 13 over the hose port

(C)on the dust baffle inside the cabinet. Secure it with the hose clamp.

3.Slide the other end of the hose over the fan intake port (F) Fig. 14 inside the cabinet. Secure it with the hose clamp.

C

B

A

A

B

Fig. 12

F

Fig. 13

Fig. 14

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 31-735 Important Safety Instructions Table of ContentsSafety Guidelines Definitions General Safety Rules Stay ALERT, Watch What YOU are DOING, and USEAdditional Specific Safety Rules Refer to them often and use them to instruct othersMotor Specifications Power ConnectionsGrounding Instructions Extension Cords Minimum Gauge Extension CordCarton Contents Assembly Time Estimate AssemblyAssembly Tools Required Attaching the Caster Assembly to the Motor CabinetInstalling the Dust Baffle Disconnect the machine from Power sourceInstalling the Dust Collector Intake Hose Attaching the Sanding Unit to the CabinetInstalling the Belt on the Motor Installing the Dust ChuteInstalling the Dust Collector OUT-TAKE Hose Belt Sander TablePage Attaching the Abrasive Disc Attaching the Dust Collector BAG OperationStarting and Stopping the Unit Adjusting the Tension and Tracking of the Sanding Belt Setting the to the Belt Setting the Miter Gauge Slot Parallel to the Sanding BeltChanging the Position of the Sanding ARM Setting the Sanding Disc to the DiscTilting the Disc Sander Table Adjusting the Dust Port Cover Abrasive Belts & Discs Their Selection and USE Surface or Edge Sanding with the Sanding BeltEND Sanding with the Belt Sanding Inside CurvesSanding Outside Curves END Sanding with the Disc Circle Sanding with DiscReplacing the Sanding Disc TroubleshootingReplacing the Sanding Belt Overload ProtectionReplacement Parts ServiceKeep Machine Clean Free Warning Label ReplacementService and Repairs AccessoriesPower TAKE-OFF Shaft Warranty Two Year Limited New Product WarrantyMesures DE Sécurité Définitions LES Instructions Importantes DE SureteLA Proposition DE Californie Règles DE Sécurité Générales Lutilisation DE CET Outil PeutRègles Spécifiques Additionnelles DE Sûreté Conserver CES DirectivesSpécifications DU Moteur Raccordements ÉlectriquesInstructions DE Mise À LA Terre Cordon DE Rallonge Mesur Minimum DE Corde D’EXTENSIONAVANT-PROPOS Description FonctionnelleContenus DE Boite Désemballage ET NettoyageLestimation DE Temps Dassemblee AssemblageOutils Nécessaires Pour L’ASSEMBLEE Fixation DE Lensemble DE Roulettes AU Boîtier DU MoteurInstallation DU Déflecteur DE Poussière Installation DU Tuyau Dadmission DU Dépoussiéreur Fixation DE Loutil DE Ponçage AU BoîtierInstallation DE LA Courroie SUR LE Moteur Installation DE LA Goulotte À PoussièreInstallation DU Tuyau DE Sortie DU Dépoussièreur Table DE LA Ponceuse À CourroiePage Fixation DU Disque Abrasif Démarrage ET Arrêt DE Unité FonctionnementFixation DU SAC À Poussière Ajuster LA Tension ET Traquer DE LA Ceinture DE Courroie Réglage DE LA Table À 90 PAR Rapport À LA Courroie Modification DE LA Position DU Bras DE LA Ponceuse Inclinaison DE LA Table DE Ponçage À DisqueAdjusting the Dust Port Cover Courroies ET Disques Abrasifs Sélection ET Utilisation Surfaçage OU Ponçage DE Chant À Laide DE LA Bande AbrasivePonçage DES Courbes Intérieures Ponçage DES Courbes ExtérieuresPonçage Dextrémité Avec LE Disque Ponçage DE Cercle Avec DisqueDepannage Entretien Remplacement DE LA Bande AbrasiveRemplacement DU Disque Abrasif Protection Contre LES SurchargesDémarrage Impossible Remplacement Gratuit DE LétiquetteGarder LA Machine Propre Lubrification ET Protection Contre LA RouilleEntretien ET Réparation Arbre DE Prise DE ForceGarantie Garantie limitée de deux ansInstrucciones DE Seguridad Importantes Pautas DE SEGURIDAD/DEFINICIONESNormas Generales DE Seguridad EL USO DE Esta HerramientaNormas Específicas Adicionales DE Seguridad Guarde Estas InstruccionesEspecificaciones DEL Motor Conexiones a LA Fuente DE AlimentaciónInstrucciones DE Conexión a Tierra Cordones DE Extensión Cordón DE Extensión DE Calibre MínimoPrologo Descripción FuncionalContenido DE Carton Desempaquetado Y LimpiezaEstimación DEL Tiempo DE Ensamblaje EnsamblajeHerramientas DE Ensamblaje Requeridas Acople DEL Ensamble DE LA Rueda AL Gabinete DEL MotorInstalación DEL Deflector DE Polvo Acople DE LA Unidad DE Lijado AL Gabinete Instalación DE LA Correa EN EL Motor Instalación DEL Conducto Para PolvoInstalación DE LA Manguera DE Salida DEL Colector DE Polvo Banco Para Lijadora DE BandaPage Instalación DEL Disco Abrasivo Arrancando Y Deteniendo LA Máquina OperaciónColocación DE LA Bolsa Recolectora DE Polvo Ajuste DE LA Tension Y Desplace DEL Banda Colocación DEL Banco a 90 Grados DE LA Banda Colocación DEL Banco Para Disco DE Lijar a 90 DEL Disco Cambio DE LA Posición DEL Brazo DE LijadoInclinación DEL Banco Para Lijadora DE Disco Ajuste DE LA Cubierta DEL Orificio Para Recolección DE Polvo Bandas Y Discos Abrasivos Selección Y USO Lijado DE Superficies O Bordes CON LA Banda DE LijadoLijado DE Curvas Internas Lijado DE Curvas ExternasLijado DE Terminaciones CON EL Disco Lijado Circular CON EL DiscoReemplazo DEL Disco DE Lijar Localizacion DE FallasReemplazo DE LA Banda DE Lijado Protección Contra SobrecargaServicio Mantenimiento Y Reparaciones AccesoriosEJE Desmontable Eléctrico Garantia Garantía limitada de dos años para productos nuevos

31-735 specifications

The DeWalt 31-735 is a powerful and versatile tool designed to meet the needs of both professionals and DIY enthusiasts alike. This sturdy machine has gained popularity for its exceptional performance and reliability, making it a top choice for various applications, including woodworking, metalworking, and general construction tasks.

One of the key features of the DeWalt 31-735 is its robust motor, which provides a substantial amount of power for heavy-duty applications. With a high RPM rating, this tool can efficiently tackle demanding tasks, allowing users to work through projects with increased speed and efficiency. The ergonomic design also contributes to its user-friendly nature, providing comfort during extended use, which helps to reduce fatigue.

The DeWalt 31-735 is equipped with advanced technologies that enhance its functionality. One notable feature is its precision cutting mechanism, which ensures accurate and clean cuts every time. The adjustable speed settings allow users to customize the tool's performance based on the material being worked on, providing greater versatility and control.

Another significant characteristic of the DeWalt 31-735 is its durability. Constructed with high-quality materials, this tool is built to withstand the rigors of demanding job sites. Its dust-collection system is designed to minimize debris and maintain a cleaner workspace, enhancing both the user's experience and the longevity of the tool.

The DeWalt 31-735 also boasts compatibility with various attachments and accessories, making it a highly adaptable option for a range of applications. Users can easily switch between different attachments, enabling quick transitions from one task to another without the need for extensive downtime.

Safety is a priority with the DeWalt 31-735, as it is equipped with features like overload protection and safety guards, ensuring that users can operate the machine confidently and securely. Additionally, the tool's solid base provides stability during operation, contributing to increased precision and safety.

In summary, the DeWalt 31-735 stands out as a reliable and efficient tool designed for those who value power, precision, and durability. With its innovative features and user-friendly design, it is undoubtedly an excellent addition to any tool collection, promising to deliver outstanding performance across a wide range of tasks. Whether for professional use or personal projects, the DeWalt 31-735 demonstrates exceptional versatility and reliability.
Top Page Image Contents