Epson 31-396 instruction manual

2.Move belt guard (B) down as shown in Fig. 20.

3.Remove the three screws (C) and drum plate (D) Fig.

4.Align the three holes in spindle (E) Fig. 21, with the three tapped holes (F) in the drum.

5.Insert the three screws that were removed in STEP 3, through spindle and tighten securely.

6.Insert the rod (G) Fig. 23, on the sanding spindle table, through hole (H).

C

D

B

Fig. 20

E

F

Fig. 21

C

C

Fig. 22

H

G

Fig. 23

12