1.Open door (A) Fig. 1, on front of machine, by sliding latch lock (B) back, and pulling out on door.
2.Remove the two screws (C) Fig. 2, and remove the sanding fence (D).
3.Lift up on hook (H) Fig. 3, and remove the shelfs (J) and (K).
A
B
Fig. 1
D
C
Fig. 2
KJ H
Fig. 3
4.Remove the four screws that attach the sander base to the shipping skid. Note: Two of the screws are shown at (L) Fig. 4.
5.
T H E M A C H I N E I S E X T R E M E LY HEAVY. HAVE FOUR OR MORE PEOPLE LIFT THE MACHINE OFF THE SHIPPING SKID.
L |
Fig. 4
6