4.Fig. 51 shows sanding at 45 degrees to the table with the miter gage.
4.Fig. 52 shows sanding at 90 degrees to the table with the miter gage.
5.Fig. 53 shows the spindle sander being used in the vertical position. It is advisable to raise or lower the table periodically to prevent spot wear and improve drum life.
Fig. 51
Fig. 52
Fig. 53
STORAGE
The Oscillating Spindle Sander has a convenient storage area for spindles, fence, miter gage, and any other components of the machine that are not in use.
Fig. 54 illustrates components of the Oscillating Edge sander stored in the base of the machine.
Fig. 54
20