2.Pull out on the table height wheel handle (C) Fig. 35.
3.Rotate table height wheel clockwise to raise the table and counter clockwise to lower the table.
4.When the table height is at the desired position tighten ratchet handles (A) and (B) Fig. 34.
TABLE DISTANCE TO BELT
DISCONNECT MACHINE FROM POWER SOURCE.
1.Move handles (C) and (D) Fig. 36 to the right as shown in Fig. 37.
2.Grasp the front of the table (E) Fig. 38, and move the table in or out to the desired position.
NOTE: THE DISTANCE FROM THE TABLE TO THE BELT SHOULD BE 1/16" OR LESS WHENEVER POSSIBLE.
3.Move handles (C) and (D) Fig. 37 to the left as shown in Fig. 36 to lock the table in position.
C
Fig. 35
CD
Fig. 36
C
D
Fig. 37
E
Fig. 38
16