Specific Safety Rules

•Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories running over rated speed can ﬂy apart and cause injury.

•Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

•Know your power tool. Read operator`s manual carefully. Learn its application and limitations, as well as the speciﬁc potential hazards related to this tool. Following this rule will reduce the risk of electric shock, ﬁre, or serious injury.

•Always wear safety glasses with side shields. Everyday eye-glasses have only impact resistant lenses; they are NOT safety glasses.

•Protect your lungs. Wear a face or dust mask if the operation is dusty.

•Protect your hearing. Wear hearing protection during extended periods of opera- tion.

•Inspect tool cords periodically and if damaged, have repaired at your nearest Fac- tory Service Center or other Authorized Service Organization. Constantly stay aware of cord location.

•Check damaged parts. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its opera- tion, A guard or other part that is damaged should be properly repaired or replaced by an authorized service center.

•Do not abuse cord. Never carry the tool by the cord or yank it to disconnect it from the receptacle. Keep cord away from heat, oil, and sharp edges. Following this rule will reduce the risk of electric shock or ﬁre.

•Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.

•Inspect for and remove all foreign objects from workpiece before polishing. Follow this rule will reduce the risk of serious personal injury.

•Drugs, alcohol, medication, Do not operate tool while under the inﬂuence of drugs, alcohol, or any medication. Follow this rule will reduce the risk of electric shock, ﬁre, or serious personal injury.

•Keep hands away from polishing area. Follow this rule will reduce the risk of cuts, scrapes, or serious personal injury.

•Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit or outlet to be used for the tool. Receptacles are available having built-in GFCI protection and may be used for this measure of safety.

•Save these instruction. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions.