BM 2610019017
Assembly
!WARNING Disconnect the plug from the power source before
making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.
!WARNING To prevent personal injury.
Only operate tool with the
wrap around handle.
WRAP AROUND HANDLE
The wrap around handle used to guide and balance the tool and should be securely attach to the front housing with the two mounting bolts as shown. Use the wrap around handle for ease of operation (Fig. 1).
MOUNTING ACCESSORIES Clean the spindle and all parts to be mounted.
For tightening and loosening the accessories, lock the spindle with the spindle lock button (Fig. 1).
Actuate the spindle lock button only when the spindle is at a complete standstill. Otherwise, the tool may become damaged.
BUFFING DISC
Thread the clamping mandrel firmly onto spindle and tighten it a with an
Mount the backing flange and the buffing disc onto the clamping mandrel. Thread on the lock nut and tighten with the two pin spanner wrench.
FIG. 2
SPINDLE 
CLAMPING
MANDRIL
BACKING
FLANGE
BUFFING
DISC
LOCK NUT
POLISHING PLATE
Mount the two spacer discs and the polishing plate onto spindle (Fig. 3).
Thread on the round nut and tighten with the
Pull the lamb’s wool bonnet over the polishing plate and tighten the attachment strings.
FIG. 3
SPINDLE 
SPACER
DISCS
POLISHING
PLATE
ROUND
NUT
LAMBS
WOOL
BONNET
POLISHING SPONGE
Thread the polishing sponge firmly onto the spindle. The lambs skin polishing bonnet can be pulled over the polishing sponge (Fig. 4).
FIG. 4
SPINDLE 
POLISHING
SPONGE
LAMBS SKIN
POLISHING
BONNET
FELT POLISHING DISC/HOOK AND
LOOP PAD
Felt polishing discs/hook and loop pads are equipped with their own threaded hub, simply thread on to spindle (Fig. 5). Be sure to seat against shoulder of spindle before turning tool “ON”.