Before Using Your Battery Charger

It is important to understand the charger’s requirements. This section explains the charger’s electrical requirements and how to prepare a battery for charging.

PLUGGING IT IN

Your charger requires a 120V AC receptacle installed according to all local codes and ordinances.

extension cord, please make sure that you follow these guidelines:

•Make sure that pins on plug of extension cord are the same number, size, and shape as those of plug on charger.

•Check that the extension cord is properly wired and in good electrical condition.

•Make sure that the wire size is large enough for its length and for the AC ampere rating, as specified in the chart below.

USING AN EXTENSION CORD

The use of an extension cord is not recommended. If you must use an

MINIMUM RECOMMENDED EXTENSION CORD

Length of Cord, in Feet	25	50	100	150

AWG* Size of Cord	18	16	12	10

*AWG=American Wire Gauge

PREPARING YOUR BATTERY TO BE CHARGED

It is important that you read and follow these guidelines while you are preparing to charge the battery.

•Make sure that you have a 12 volt lead-acid battery. Determine voltage of battery by referring to vehicle owner’s manual. Charge battery initially at charger’s lowest rate.

•Clean the battery terminals. Be careful to keep corrosion from getting in or around your eyes.

•Wear safety glasses. See additional “Personal Safety Precautions” on page 4.

•For batteries with removable vent caps, if required, add distilled water to each cell until the battery acid reaches the level recommended by the manufacturer. This will help purge excessive gases from the cells. Be careful not to overfill. If you have a sealed battery with non-removable vent caps, no action is necessary.

•Take time to read all of the battery manufacturer’s specific precautions, such as removing or not removing vent caps while charging, and recommended rates of charge.

•Be sure that the area around the battery is well ventilated while it is being charged. Gas can be forcefully blown away by using a piece of cardboard or other nonmetallic material as a fan.

•If it is necessary to remove the battery from the vehicle to charge it, always remove the grounded terminal from the battery first. Turn off all vehicle accessories to avoid sparks from occurring.

•NOTE: A marine (boat) battery installed in a boat must be removed and charged on shore.

SSF-1000A specifications

The Schumacher SSF-1000A is a state-of-the-art electric scooter designed for riders seeking a combination of power, efficiency, and modern technology. This innovative model showcases a sleek design, highlighting its user-friendly features and advanced engineering.

One of the standout aspects of the SSF-1000A is its powerful 1000W motor, which provides impressive acceleration and a top speed of up to 28 mph. This makes it an ideal choice for both urban commuting and recreational riding. The scooter’s robust performance is complemented by its high-capacity lithium-ion battery that offers a range of up to 40 miles on a single charge, allowing users to travel longer distances without the need for frequent recharging.

The SSF-1000A is equipped with a dual braking system, combining both electronic and mechanical brakes for enhanced safety and reliability. This braking system ensures smooth stopping power, providing riders with peace of mind, especially when navigating busy streets or steep inclines. The scooter also features front and rear LED lights, enhancing visibility during nighttime rides.

In terms of comfort, the SSF-1000A boasts an adjustable suspension system that absorbs bumps and uneven terrain, making it easier to ride over various surfaces. The wide, anti-slip deck offers ample foot space, promoting stability and balance, which is especially beneficial for newer riders. The scooter also comes with a lightweight aluminum frame, making it easy to carry and store.

One of the most notable technological advancements in the SSF-1000A is its smart display panel, which provides real-time information including speed, battery level, and distance traveled. This intuitive interface allows riders to monitor their performance at a glance. Additionally, the scooter supports Bluetooth connectivity, enabling users to pair their smartphones and access navigation features and ride statistics through a dedicated app.

The Schumacher SSF-1000A is not just about performance; it also reflects a commitment to sustainability. Its electric nature means zero emissions, making it an environmentally friendly alternative to traditional gasoline-powered vehicles. Overall, the SSF-1000A combines practicality, cutting-edge technology, and eco-friendly design, making it a top contender in the electric scooter market. Whether for daily commutes or leisure rides, this scooter stands out as a reliable and efficient choice for modern riders.