Black & Decker CS1015 instruction manual Causes and operator Prevention of kickback

Page 3

This enables better control of the power tool in unexpected situations.

f)Dress properly. Do not wear loose clothing or jewelry. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

g)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.

Use of dust collection can reduce dust-related hazards.

4)Power tool use and care

a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.

Use of the power tool for operations different from those intended could result in a hazardous situation.

5)Service

a)Have your power tool serviced by a qualified repair person using only

identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety instructionS for all saws

DANGER: Keep hands away from cutting area and the blade. Keep your second hand on auxiliary handle or motor housing. If both hands are holding the saw, they cannot be cut by the blade.

b)Do not reach underneath the workpiece. The guard cannot protect you from the blade below the workpiece.

c)Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the blade teeth should be visible below the workpiece.

d)Never hold piece being cut in your hands or across your leg. Secure the workpiece to a stable platform. It is important to support the work properly to minimize body exposure, blade binding, or loss of control.

e)Hold power tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will also make exposed metal parts of the power tool “live” and shock the operator.

f)When ripping always use a rip fence or straight edge guide. This improves the accuracy of cut and reduces the chance of blade binding.

g)Always use blades with correct size and shape (diamond versus round) of arbour holes. Blades that do not match the mounting hardware of the saw will run eccentrically, causing loss of control.

h)Never use damaged or incorrect blade washers or bolt. The blade washers and bolt were specially designed for your saw, for optimum performance and safety of operation.

Causes and operator

Prevention of kickback:

•Kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator.

•When the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator.

•If the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the blade can dig into the top surface of the wood causing the blade to climb out of the kerf and jump back toward the operator.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents To register your new product, visit 4 184mm, 15 AMP Circular SawKeep children and bystanders General Power tool Safety warningsCauses and operator Prevention of kickback Safety instructionS for all sawsLower guard safety instructions Additional safEty instructionsMilliwatts Label on your tool may includeDefinitions are as follows VoltsIntended USE Keep blades sharp and cleanAlways secure work to prevent workpiece movement during cut MotorAttaching the blade Assembly / adjustment set-pAdjusting the depth of cut Overview figSwitch OperationGuard Against Kickback Full Two-Year Home Use Warranty MaintenanceAccessories Service InformationUnit will not start Cord not plugged Problem Possible Cause Possible SolutionServiced at a Black+Decker Service center or authorizedScie circulaires 7-1/4 184mm, 15 Ampère Règles Générales DE Sécurité Ne pas passer les mains sous la pièce PourtouteslessciesCauses de l’effet de Rebond et preévention Par L’opérateur Les performances et la sécurité de fonctionnementOu produire un rebond au redémarrage de la scie Directives de Sécurité Supplémentaires scies Circulaires Moteur Pour Réduire LE Risque ’EFFET DE RebondSerrer fermement la scie avec les deux mains en tout temps Garder les lames aiguisées et propresConfiguration de ’assemblage et des Réglages Aperçu Général figUtilisation Prévue Interrupteur FonctionnementDécoupes Générales Important PROTÉGEZ-VOUS DES Effets DE RebondEntretien AccessoiresDécoupe EN Poche Rangement de la cléProblème Cause possible Solution possible Sierras circulares de 184mm 7-1/4, 15 amperios Normas Generales DE Seguridad Uso y mantenimiento de la herramienta eléctrica Instruccionesdeseguridad ParatodaslassierrasInstrucciones De Seguridad para El Protector inferior Corte y reduce la posibilidad de que la hoja se atasqueTrabajo o producir un retroceso Instrucciones Adicionales Seguridad Retire todos los clavos de la madera antes de cortar Manténgase alerta y en controlMantenga las hojas afiladas y limpias Esto puede provocar RetrocesoAjuste de la profundidad de corte y Descripción general figEnsamblado/Ajuste USO PrevistoInterruptor FuncionamientoAccesorios Corte InternoAlmacenamiento de la llave LubricaciónReemplazo gratuito de las Etiquetas de advertencias si sus Problema Causa posible Solución posibleAños DE Garantia Telephone · No. TeléfonoSolamente Para Propositos DE Mexico
Related manuals
Manual 32 pages 34.84 Kb

CS1015 specifications

The Black & Decker CS1015 is a versatile and powerful electric chainsaw designed for both professional and home users. It is recognized for its efficiency, ease of use, and robust performance, making it an ideal tool for cutting through branches, logs, and other types of wood with minimal effort.

One of the standout features of the CS1015 is its 10-inch cutting bar, which is optimized for maneuverability and control. This size is perfect for tackling light to medium-duty tasks, such as trimming trees, clearing fallen branches, or doing yard work. With a powerful 10 amp motor, the chainsaw delivers a high level of performance that allows users to make quick and clean cuts through tough materials.

Safety is a key consideration in the design of the CS1015. It is equipped with a robust safety brake that stops the chain in less than a second if the saw kicks back, providing peace of mind for users who may be new to chainsaw operation. Additionally, the tool features a two-handed grip design that enhances stability and control during operation, reducing the risk of accidents.

The CS1015 also incorporates a tool-free chain tensioning system, making it easier to adjust the chain for optimal performance without needing additional tools. This feature is particularly valuable for users who frequently need to change or adjust the chain during work. Furthermore, the automatic oiler ensures that the chain is adequately lubricated during use, enhancing its longevity and reducing wear.

In terms of weight, the CS1015 is lightweight and easy to handle, allowing users to maneuver it comfortably for extended periods. The electric motor eliminates the need for gasoline, providing a cleaner solution with lower emissions and reduced noise levels compared to gas-powered alternatives. This eco-friendly aspect makes it a great choice for residential areas or any location where noise and fumes could be a concern.

In conclusion, the Black & Decker CS1015 is an impressive electric chainsaw that combines power, safety features, and user-friendly design. It is well-suited for various outdoor tasks while being lightweight and low-maintenance. Whether it's for small projects around the home or more demanding tasks, the CS1015 provides efficiency and reliability that users can depend on.
Top Page Image Contents