Black & Decker SSL20, SSL16 Functional Description, Safety Guidelines Definitions

Page 3

90565382 SSL16 SSL20 NEW Smart Select.qxd:??????-00 BDL500 laser 6/3/10 1:40 PM Page 4

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disperse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.

WARNING: ALWAYS use safety glasses. Everyday eye glasses are NOT safety glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS

WEAR CERTIFIED SAFETY EQUIPMENT:

ANSI Z87.1 eye protection (CAN/CSA Z94.3)

ANSI S12.6 (S3.19) hearing protection

NIOSH/OSHA/MSHA respiratory protection

SAFETY GUIDELINES - DEFINITIONS

It is important for you to read and understand this manual.

The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

FUNCTIONAL DESCRIPTION

1.Variable speed switch

2.Forward/reverse slider

3.Optimal performance selector (clutch)

4.Chuck

5.Battery

6.Battery charger

7.Battery release button

8.Screwdriver bit holder

4

3

 

2

 

 

 

 

 

1

 

6

 

 

 

 

7

8

 

 

 

 

 

5

 

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

The label on your tool may include the following symbols

amperes

V

volts

A

Hz

hertz

W

watts

min

minutes

 

......................

alternating

 

 

 

no

current

 

 

direct current

no load speed

 

 

 

..........................

Class II Construction

 

........................

earthing terminal

 

 

 

 

 

........................

safety alert symbol

...................../min

revolutions or

 

 

 

 

 

reciprocations

 

 

 

 

 

per minute

IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGERS

SAVE THESE INSTRUCTIONS: This manual contains important safety instructions for battery chargers.

Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using battery pack.

WARNING: Shock hazard. Do not allow any liquid to get inside charger.

CAUTION: Burn hazard. To reduce the risk of injury, charge only designated Black

&Decker batteries. Other types of batteries may burst causing personal injury and damage.

CAUTION: Under certain conditions, with the charger plugged in to the power supply, the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.

DO NOT attempt to charge the battery pack with any chargers other than the ones in this manual. The charger and battery pack are specifically designed to work together.

These chargers are not intended for any uses other than charging designated Black & Decker rechargeable batteries. Any other uses may result in risk of fire, electric shock or electrocution.

Do not expose charger to rain or snow.

Pull by plug rather than cord when disconnecting charger. This will reduce risk of damage to electric plug and cord.

Make sure that cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.

Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk of fire, electric shock, or electrocution.

An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller the gauge number of the wire, the greater the capacity of the cable, that is 16 gauge has more capacity than 18 gauge. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size.

4

5

 

 

 

 

 

 

 

 

 

 

 

 

Image 3
Contents SSL16 16V MAX SSL20 20V MAX 16V & 20V MAX* Cordless DrillsWork area safety General Power Tool Safety WarningsSafety Guidelines Definitions Wear Certified Safety EquipmentFunctional Description HOT/COLD Pack Delay Charging ProcedureCharger Diagnostics BAD BatteryTorque Control Smart Select Technology Figure E Trigger Switch & Reversing Button Figure DInstalling and Removing Battery Pack from the Tool Operating InstructionsOn Board BIT Storage Figure G MaintenanceAccessories Screw DrivingLire Avant DE Retourner CE Produit Service InformationFull TWO-YEAR Home USE Warranty SSL16 16V MAXPage Symboles Description FonctionnelleToujours Porter UN Équipement DE Protection Homologué Lire Toutes LES Directives Avertissement de sécurité et directives perceuses Rangement Intégré DES Mèches Figure G PerçageCorrecteur DE Couple Technologie Smart Select Figure E VissageAccessoires EntretienDépannage LEA EL Manual Antes DE Devolver Normas DE Seguridad Específicas De la cubierta Descripción DE LAS FuncionesLEA Todas LAS Instrucciones SímbolosRetraso POR Paquete CALIENTE/FRÍO Recomendaciones CON Respecto AL AlmacenamientoDiagnóstico DEL Cargador Batería EN MAL EstadoControl DE Torsión Tecnología Smart Select Figura E Instrucciones DE OperaciónPara Extraer EL Paquete DE Interruptor Disparador Y Botón DE Inversión Figura DTaladrado Portabrocas SIN Llave Figura FDestornillado Espacio EN LA Herramienta Para Guardar Brocas Figura GEsta Garantia no Aplica Cuando Información DE MantenimientoGarantía Completa DE DOS Años Para USO EN EL Hogar Años DE GarantiaSolamente Para Propositos DE Mexico
Related manuals
Manual 40 pages 55.72 Kb

SSL20, SSL16 specifications

The Black & Decker SSL16, SSL20, SSL20SBR, and SSL16 (16V MAX*) series represent a significant innovation in the realm of cordless tools and outdoor equipment, particularly in the domain of battery-powered lawn and garden maintenance. These models showcase a seamless blend of advanced technology, user-friendly design, and robust performance, catering to both homeowners and professionals alike.

The SSL16 model is powered by a 16V MAX lithium-ion battery, which provides reliable and consistent power for a range of applications. This ensures that users experience minimal downtime, as the battery is engineered for longer runtime and quicker charging than traditional batteries. Its lightweight design enhances maneuverability, making it an excellent option for trimming and shaping hedges or small bushes.

Moving to the SSL20 and SSL20SBR, both models elevate the performance with an enhanced 20V MAX lithium-ion battery. This increased power translates to greater efficiency and the ability to tackle larger, more demanding tasks with ease. The SSL20SBR model features a brushless motor, reducing wear and tear while delivering superior performance. Brushless technology not only extends the tool’s lifespan but also maximizes runtime and efficiency, offering users a powerful cutting experience while minimizing maintenance needs.

One standout feature across the series is the ergonomic design, including soft-grip handles that reduce user fatigue during prolonged use, making these tools comfortable to operate. The tools also come equipped with an adjustable cutting width, enabling users to adapt their approach to different gardening tasks. This feature allows for precise trimming, ensuring that users can achieve the desired look for their lawns and gardens.

The Black & Decker SSL series also emphasizes user safety with integrated safety features, including a safety lock to prevent accidental starts. Coupled with a lightweight design, these tools ensure that users can maintain control and comfort, even in challenging working conditions.

In summary, the Black & Decker SSL16, SSL20, SSL20SBR, and SSL16 (16V MAX*) models showcase a remarkable fusion of power, versatility, and usability. From their advanced battery technologies to user-oriented features, these tools stand out in the market, offering gardeners and landscapers the reliability and efficiency they need to achieve professional results. Whether tackling small projects or larger landscaping endeavors, these models are built to perform, making them an excellent addition to any tool collection.