Western Telematic RSM-32DC, RSM-8, RSM-16DC manual Network Configuration, Servers and Clients

Page 43

Configuration

5.8. Network Configuration

The Network Parameters Menus are used to select parameters and options for the Network Port and also allow you to implement IP Security features, which can restrict access based on the user’s IP Address.

Although the Web Browser Interface and Text Interface allow definition of essentially the same parameters, parameters are arranged differently in the two interfaces. In the Text Interface, most network parameters are defined via one menu. But in the Web Browser Interface, network parameters are divided between eight separate submenus as described in this section.

NETWORK PARAMETERS:

 

 

 

 

COMMUNICATION SETTING

192.168.168.168

SERVERS AND CLIENTS

On

1.

IP Address:

21.

Telnet Access:

2.

Subnet Mask:

255.255.255.0

22.

SSH Access:

On

3.

Gateway Addr:

(undefined)

23.

Web Access:

On

4.

DHCP:

Off

24.

SYSLOG Addr:

(undefined)

5.

IP Security:

Off

25.

SNMP Access:

Off

6.

Static Route:

Off

26.

SNMP Trap:

Off

7.

DNS Servers:

(undefined)

27.

LDAP:

Off

GENERAL PARAMETERS

 

28.

TACACS:

Off

Permit

29.

RADIUS:

Off

11.

Supervisor Mode:

30.

PING Access:

On

12.

Logoff Char:

^X

31.

Raw Socket Access: Off

13.

Sequence Disc:

One Char

 

 

 

14.

Inact Timeout:

5 Min

 

 

 

15.

Command Echo:

On

 

 

 

16.

Accept Break:

On

 

 

 

Enter: #<CR> to change,

<ESC> exit ...

Figure 5.9: Network Parameters Menu (Supervisor Mode Only)

Figure 5.10: Network Configuration Menu (Web Browser Interface)

5-24

Page 42 Page 44
Image 43
Page 42 Page 44
Contents RSM Series Secure Racking Shock Hazard Do Not Enter Lithium BatteryDisconnect Power Agency Approvals Table of Contents Configuration Table of Contents List of Figures Capture Buffer Security and Collocation FeaturesIntroduction Intelligent Port SelectionBold Font Configuration BackupRSM-8, RSM-16, RSM-16DC, RSM-32 and RSM-32DC Units Typographic ConventionsFront Panel Unit DescriptionInstrument Back Panel Model RSM-8 Back Panel Power On/Off Switch Connect your Control Device to the RSM Quick Hardware InstallationApply Power to the RSM Getting StartedCommunicating with the RSM Port Status Screen Text Interface RSM-8 Shown Getting Started Connecting Power to the RSM Unit Hardware InstallationDC Powered Units Connecting Devices to the RSM Connecting the Network CableCommunicating with the RSM Unit ConfigurationText Interface Configuration Home Screen Web Browser Interface Web Browser InterfaceConfiguration Menus System SetUp PortsSystem Parameters Defining System ParametersConfiguration Real Time Clock and Calendar Invalid Access Lockout Feature Audit Log Callback Security Configuration Port Access Supervisor AccessUser Accounts Viewing User Accounts Managing User AccountsAdd User Menu Text Interface RSM-8 Shown Adding User AccountsConfiguration Deleting User Accounts Modifying User Accounts1. RS232 Port Modes RS232 Port ConfigurationPort Configuration Menu Text Interface Communication Settings 2. RS232 Port Configuration MenusGeneral Parameters AT&C1&D2S0=1&B1&H1&R2 Port Mode ParametersNetwork Services Configuring the Internal Modem Servers and Clients Network ConfigurationConfiguration 11 Network Parameters Menu Web Browser Interface Network Parameters12 Network Port Parameters Menu Web Browser Interface Network Port ParametersConfiguration IP Security IP SecurityConfiguration Configuration Net/Mask Pairs ExceptConfiguration 15 Static Route Menu Text Interface Static Route17 Nomain Name Server Menu Text Interface Domain Name ServerSnmp Parameters 19 Snmp Access Menu Text InterfaceConfiguration Ldap Ldap ParametersConfiguration Ldap Group Group Membership Value Type Default = DN25 Add Ldap Group Menu Text Interface RSM-8 Shown 27 View Ldap Group Menu Text Interface RSM-8 Shown 29 Modify Ldap Group Menu Text Interface RSM-8 Shown 31 Delete Ldap Group Menu Web Browser Interface 32 Ldap Kerberos Set Up Menu Text Interface Configuration 34 The Tacacs Parameters Menu Text Interface Tacacs ParametersConfiguration 36 The Radius Parameters Menu Text Interface Radius ParametersConfiguration 38 The Copy Port Parameters Menu CP 3,5,7-9 Enter Save User Selected ParametersStatus Screens Status Screens Port Status Screen /SPort Diagnostics Screen RSM-8 Shown Port Diagnostics Screen /SDPorttcp Portstatus Username Network Status Screen /SNPort Parameters Screen RS232 Port Shown Port Parameters Screens /WXx Enter Operation Any-to-Any ModePort Connection and Disconnection Operation Operation Enter 4 EnterHunt Group Example Defining Hunt GroupsPassive Mode Reading Data from Buffer Mode Ports Buffer ModePort Buffers Modem Mode Network Port Numbers Telnet & SSH FunctionsSSH Encryption Configuration Direct Connect FeatureStandard Telnet Protocol, SSH and Raw Socket Telnet & SSH Functions RSM-32 & RSM-32DC Standard Telnet Direct Connection without Password RSM-8SSH Direct Connection with Password RSM-8 RSM-16 & RSM-16DCRaw Socket Direct Connection without Password RSM-8 Raw Socket Direct Connection with Password RSM-8Connection Example Terminating a Direct Connect Session Configuration Syslog FeatureCriteria for Generating a Syslog Message Test Menu Text Interface, Supervisor Mode Only Testing Syslog Configuration10-1 Snmp TrapsSnmp Trap Message How and When Snmp Traps are SentSnmp Contact Optional Snmp Location Optional Testing the Snmp Trap Function Sending Parameters to a File Saving and Restoring Configuration ParametersRestoring Saved Parameters 12-1 Upgrading RSM Firmware12-2 Command Conventions Command Reference GuideCommand Summary Resident Disconnect Sequence Command SetAudit Log Format /CP Enter ConnectFormat /C x x Enter CP Copy RS232 Port ParametersErase Buffer Third Party DisconnectFormat /D/Y x x Enter 2 Enter or /D/Y 3 EnterDisplay Site ID Reboot System DefaultSet System Parameters HelpSet Network Port Parameters Send SSH KeySet RS232 Port Parameters Display Port Status PW Change PasswordSD Display Port Diagnostics Read BufferSave Parameters UF Upgrade FirmwareUL Unlock Port Invalid Access Lockout Test Test Network ParametersFormat /X Enter Exit Command ModeDisplay Port Parameters Who Format /W x EnterWhen not connected When connectedAppendix A. RS232 Port Interface Models RSM-32 and RSM-32DC Appendix B. SpecificationsRS232 Port Interface Connectors Physical / Environmental PowerAppendix C. Customer Service Trademarks Used in this Manual Trademark and Copyright InformationTacacs Dhcp IndexIndex-2 Index-3 Index-4
Top Page Image Contents