Western Telematic RSM-32DC, RSM-8, RSM-16DC manual Configuration

Page 65

Configuration

To access the LDAP Kerberos Set Up menu, access the command mode using a port and password that permit access to Supervisor Level commands and then proceed as follows:

•Text Interface: Type /N and press [Enter] to display the Network Parameters Menu (Figure 5.9.) At the Network Parameters Menu, type 27 and press [Enter] to display the LDAP Parameters menu (Figure 5.22.) At the LDAP Parameters Menu, type 5 and press [Enter] and then use the resulting submenu to set the Bind Type to Kerberos. Next, return to the LDAP Parameters menu. Note that the

LDAP Parameters Menu now includes a prompt which is used to select Kerberos parameters. Type 14 and press [Enter] to display the Kerberos Set Up menu as shown in Figure 5.32.

•Web Browser Interface: At the Home Screen, click on the Network Configuration link to display the Network Configure menu (Figure 5.10,) and then click on the LDAP Parameters link to display the LDAP Parameters menu (Figure 5.23.) At the LDAP Parameters menu, click on the LDAP Kerberos Setup link to display the LDAP Kerberos Setup menu as shown in Figure 5.33.

The LDAP Kerberos Setup menu allows you to define the following parameters:

•Port: (Default = 88.)

•Realm: (Default = Undefined.)

•Key Distribution Centers (KDC1 through KDC5): (Default = Undefined.)

•Domain Realms 1 through 5: (Default = Undefined.)

5-46

Image 65

Contents RSM Series Secure Racking Shock Hazard Do Not Enter Lithium BatteryDisconnect Power Agency Approvals Table of Contents Configuration Table of Contents List of Figures Introduction Security and Collocation FeaturesIntelligent Port Selection Capture BufferRSM-8, RSM-16, RSM-16DC, RSM-32 and RSM-32DC Units Configuration BackupTypographic Conventions Bold FontFront Panel Unit DescriptionInstrument Back Panel Model RSM-8 Back Panel Power On/Off Switch Apply Power to the RSM Quick Hardware InstallationGetting Started Connect your Control Device to the RSMCommunicating with the RSM Port Status Screen Text Interface RSM-8 Shown Getting Started DC Powered Units Hardware InstallationConnecting Power to the RSM Unit Connecting Devices to the RSM Connecting the Network CableText Interface ConfigurationCommunicating with the RSM Unit Configuration Home Screen Web Browser Interface Web Browser InterfaceConfiguration Menus System SetUp PortsSystem Parameters Defining System ParametersConfiguration Real Time Clock and Calendar Invalid Access Lockout Feature Audit Log Callback Security Configuration User Accounts Supervisor AccessPort Access Viewing User Accounts Managing User AccountsAdd User Menu Text Interface RSM-8 Shown Adding User AccountsConfiguration Deleting User Accounts Modifying User Accounts1. RS232 Port Modes RS232 Port ConfigurationPort Configuration Menu Text Interface Communication Settings 2. RS232 Port Configuration MenusGeneral Parameters AT&C1&D2S0=1&B1&H1&R2 Port Mode ParametersNetwork Services Configuring the Internal Modem Servers and Clients Network ConfigurationConfiguration 11 Network Parameters Menu Web Browser Interface Network Parameters12 Network Port Parameters Menu Web Browser Interface Network Port ParametersConfiguration IP Security IP SecurityConfiguration Configuration Net/Mask Pairs ExceptConfiguration 15 Static Route Menu Text Interface Static Route17 Nomain Name Server Menu Text Interface Domain Name ServerSnmp Parameters 19 Snmp Access Menu Text InterfaceConfiguration Ldap Ldap ParametersConfiguration Ldap Group Group Membership Value Type Default = DN25 Add Ldap Group Menu Text Interface RSM-8 Shown 27 View Ldap Group Menu Text Interface RSM-8 Shown 29 Modify Ldap Group Menu Text Interface RSM-8 Shown 31 Delete Ldap Group Menu Web Browser Interface 32 Ldap Kerberos Set Up Menu Text Interface Configuration 34 The Tacacs Parameters Menu Text Interface Tacacs ParametersConfiguration 36 The Radius Parameters Menu Text Interface Radius ParametersConfiguration 38 The Copy Port Parameters Menu CP 3,5,7-9 Enter Save User Selected ParametersStatus Screens Status Screens Port Status Screen /SPort Diagnostics Screen RSM-8 Shown Port Diagnostics Screen /SDPorttcp Portstatus Username Network Status Screen /SNPort Parameters Screen RS232 Port Shown Port Parameters Screens /WXx Enter Port Connection and Disconnection Any-to-Any ModeOperation Operation Operation Enter 4 EnterHunt Group Example Defining Hunt GroupsPassive Mode Reading Data from Buffer Mode Ports Buffer ModePort Buffers Modem Mode SSH Encryption Telnet & SSH FunctionsNetwork Port Numbers Standard Telnet Protocol, SSH and Raw Socket Direct Connect FeatureConfiguration Telnet & SSH Functions SSH Direct Connection with Password RSM-8 Standard Telnet Direct Connection without Password RSM-8RSM-16 & RSM-16DC RSM-32 & RSM-32DCConnection Example Raw Socket Direct Connection with Password RSM-8Raw Socket Direct Connection without Password RSM-8 Terminating a Direct Connect Session Configuration Syslog FeatureCriteria for Generating a Syslog Message Test Menu Text Interface, Supervisor Mode Only Testing Syslog Configuration10-1 Snmp TrapsSnmp Contact Optional Snmp Location Optional How and When Snmp Traps are SentSnmp Trap Message Testing the Snmp Trap Function Sending Parameters to a File Saving and Restoring Configuration ParametersRestoring Saved Parameters 12-1 Upgrading RSM Firmware12-2 Command Conventions Command Reference GuideCommand Summary Audit Log Command SetResident Disconnect Sequence Format /C x x Enter ConnectCP Copy RS232 Port Parameters Format /CP EnterFormat /D/Y x x Enter Third Party Disconnect2 Enter or /D/Y 3 Enter Erase BufferSet System Parameters Reboot System DefaultHelp Display Site IDSet RS232 Port Parameters Send SSH KeySet Network Port Parameters SD Display Port Diagnostics PW Change PasswordRead Buffer Display Port StatusUL Unlock Port Invalid Access Lockout UF Upgrade FirmwareTest Test Network Parameters Save ParametersDisplay Port Parameters Who Exit Command ModeFormat /W x Enter Format /X EnterAppendix A. RS232 Port Interface When connectedWhen not connected RS232 Port Interface Connectors Appendix B. SpecificationsPhysical / Environmental Power Models RSM-32 and RSM-32DCAppendix C. Customer Service Trademarks Used in this Manual Trademark and Copyright InformationTacacs Dhcp IndexIndex-2 Index-3 Index-4