Western Telematic RSM-32DC, RSM-16DC manual Modify Ldap Group Menu Text Interface RSM-8 Shown

Configuration

MODIFY LDAP GROUP DETAILS:
1.	LDAP Group		default
2.	Access Level:		Admin
3.	Port Access:
	PORT#	PORT NAME	ACCESS	PORT#	PORT NAME	ACCESS
	-------------------------------			-------------------------------
	1	(undefined)	On	6	(undefined)	On
	2	(undefined)	On	7	(undefined)	On
	3	(undefined)	On	8	(undefined)	On
	4	(undefined)	On	9	MODEM	On
	5	(undefined)	On

Enter: #<CR> to select,

<ESC> to return to previous menu ...

Figure 5.29: Modify LDAP Group Menu (Text Interface; RSM-8 Shown)

Figure 5.30: Modify LDAP Group Menu (Web Browser Interface; RSM-8 Shown)

5.8.7.3. Modifying LDAP Groups

If you want to modify an existing LDAP Group in order to change command access rights or port access rights, the "Modify LDAP Group" function can be used to edit group parameters. To Modify an existing LDAP Group, proceed as follows:

•Text Interface: Type /N and press [Enter] to display the Network Parameters Menu (Figure 5.9.) At the Network Parameters Menu, type 27 and press [Enter] to display the LDAP parameters menu (Figure 5.22), then type 13 and press [Enter] to display the LDAP Group Menu (Figure 5.24), then type 3 and press [Enter]. The RSM will prompt you to select the desired group; key in the name of the group and press [Enter], the RSM will display the Modify LDAP Group screen (Figure 5.29.)

•Web Browser Interface: At the RSM Home Screen, click on the "Network Configuration" link to display the Network Configure menu (Figure 5.10,) and then click on the "LDAP Parameters" link to display the LDAP Parameters menu (Figure 5.23.) At the LDAP Parameters menu, click on the "LDAP Group Configuration" link to display the LDAP Group Configuration menu, then click the "View/Modify LDAP Group" link to display the Choose LDAP Group menu; use the drop down menu to select the desired group, select "Modify LDAP Group" and then click the "Choose LDAP Group" button to display the screen shown in Figure 5.30.

5-43