Western Telematic RSM-32DC, RSM-8, RSM-16 manual Network Parameters Menu Web Browser Interface

Page 45

Configuration

Figure 5.11: Network Parameters Menu (Web Browser Interface)

5.8.1.Network Parameters

In the Text Interface, these parameters are accessed via the Network Configuration menu (Figure 5.9.) In the Web Browser Interface, these parameters can be found by first clicking the "Network Configuration" link, and then Clicking the "Network Parameters" link to display the Network Parameters menu (Figure 5.11.)

•IP Address: (Default = 192.168.168.168.)

•Subnet Mask: (Default = 255.255.255.0.)

•Gateway Address: (Default = undefined.)

•DHCP: Enables/Disables Dynamic Host Configuration Protocol. When this option is "On", the RSM will perform a DHCP request. Note that the MAC address for the RSM is listed on the Network Status Screen. (Default = Off.)

Note: Before configuring this feature via Telnet or Web, make certain your DHCP server is set up to assign a known, fixed IP address. You will need this new IP address in order to reestablish a network connection with the RSM unit.

•Telnet Access: Enables/disables Telnet access. When Telnet Access is "Off," users will not be allowed to establish a Telnet connection to the unit. (Default = On.)

•Web Access: Enables/disables the Web Browser Interface. When disabled, users will not be allowed to contact the unit via the Web Browser Interface.

(Default = Off.)

•SSH Access: Enables/disables SSH communication. (Default = On.)

•SYSLOG Address: The IP Address or domain name (up to 64 characters) for the Syslog Daemon that will receive log records generated by the RSM. For more information, please refer to Section 9. (Default = 0.0.0.0.)

•Ping Access: Enables/Disables response to the ping command. When Disabled, the RSM will not respond to Ping commands. (Default = On.)

•Raw Socket Access: Enables/Disables Raw Socket Protocol access to the Network Port via Direct Connect. (Default = Off.)

5-26

Image 45

Contents RSM Series Secure Racking Shock Hazard Do Not Enter Lithium BatteryDisconnect Power Agency Approvals Table of Contents Configuration Table of Contents List of Figures Introduction Security and Collocation FeaturesIntelligent Port Selection Capture BufferRSM-8, RSM-16, RSM-16DC, RSM-32 and RSM-32DC Units Configuration BackupTypographic Conventions Bold FontFront Panel Unit DescriptionInstrument Back Panel Model RSM-8 Back Panel Power On/Off Switch Apply Power to the RSM Quick Hardware InstallationGetting Started Connect your Control Device to the RSMCommunicating with the RSM Port Status Screen Text Interface RSM-8 Shown Getting Started Hardware Installation Connecting Power to the RSM UnitDC Powered Units Connecting Devices to the RSM Connecting the Network CableConfiguration Communicating with the RSM UnitText Interface Configuration Home Screen Web Browser Interface Web Browser InterfaceConfiguration Menus System SetUp PortsSystem Parameters Defining System ParametersConfiguration Real Time Clock and Calendar Invalid Access Lockout Feature Audit Log Callback Security Configuration Supervisor Access Port AccessUser Accounts Viewing User Accounts Managing User AccountsAdd User Menu Text Interface RSM-8 Shown Adding User AccountsConfiguration Deleting User Accounts Modifying User Accounts1. RS232 Port Modes RS232 Port ConfigurationPort Configuration Menu Text Interface Communication Settings 2. RS232 Port Configuration MenusGeneral Parameters AT&C1&D2S0=1&B1&H1&R2 Port Mode ParametersNetwork Services Configuring the Internal Modem Servers and Clients Network ConfigurationConfiguration 11 Network Parameters Menu Web Browser Interface Network Parameters12 Network Port Parameters Menu Web Browser Interface Network Port ParametersConfiguration IP Security IP SecurityConfiguration Configuration Net/Mask Pairs ExceptConfiguration 15 Static Route Menu Text Interface Static Route17 Nomain Name Server Menu Text Interface Domain Name ServerSnmp Parameters 19 Snmp Access Menu Text InterfaceConfiguration Ldap Ldap ParametersConfiguration Ldap Group Group Membership Value Type Default = DN25 Add Ldap Group Menu Text Interface RSM-8 Shown 27 View Ldap Group Menu Text Interface RSM-8 Shown 29 Modify Ldap Group Menu Text Interface RSM-8 Shown 31 Delete Ldap Group Menu Web Browser Interface 32 Ldap Kerberos Set Up Menu Text Interface Configuration 34 The Tacacs Parameters Menu Text Interface Tacacs ParametersConfiguration 36 The Radius Parameters Menu Text Interface Radius ParametersConfiguration 38 The Copy Port Parameters Menu CP 3,5,7-9 Enter Save User Selected ParametersStatus Screens Status Screens Port Status Screen /SPort Diagnostics Screen RSM-8 Shown Port Diagnostics Screen /SDPorttcp Portstatus Username Network Status Screen /SNPort Parameters Screen RS232 Port Shown Port Parameters Screens /WXx Enter Any-to-Any Mode OperationPort Connection and Disconnection Operation Operation Enter 4 EnterHunt Group Example Defining Hunt GroupsPassive Mode Reading Data from Buffer Mode Ports Buffer ModePort Buffers Modem Mode Telnet & SSH Functions Network Port NumbersSSH Encryption Direct Connect Feature ConfigurationStandard Telnet Protocol, SSH and Raw Socket Telnet & SSH Functions SSH Direct Connection with Password RSM-8 Standard Telnet Direct Connection without Password RSM-8RSM-16 & RSM-16DC RSM-32 & RSM-32DCRaw Socket Direct Connection with Password RSM-8 Raw Socket Direct Connection without Password RSM-8Connection Example Terminating a Direct Connect Session Configuration Syslog FeatureCriteria for Generating a Syslog Message Test Menu Text Interface, Supervisor Mode Only Testing Syslog Configuration10-1 Snmp TrapsHow and When Snmp Traps are Sent Snmp Trap MessageSnmp Contact Optional Snmp Location Optional Testing the Snmp Trap Function Sending Parameters to a File Saving and Restoring Configuration ParametersRestoring Saved Parameters 12-1 Upgrading RSM Firmware12-2 Command Conventions Command Reference GuideCommand Summary Command Set Resident Disconnect SequenceAudit Log Format /C x x Enter ConnectCP Copy RS232 Port Parameters Format /CP EnterFormat /D/Y x x Enter Third Party Disconnect2 Enter or /D/Y 3 Enter Erase BufferSet System Parameters Reboot System DefaultHelp Display Site IDSend SSH Key Set Network Port ParametersSet RS232 Port Parameters SD Display Port Diagnostics PW Change PasswordRead Buffer Display Port StatusUL Unlock Port Invalid Access Lockout UF Upgrade FirmwareTest Test Network Parameters Save ParametersDisplay Port Parameters Who Exit Command ModeFormat /W x Enter Format /X EnterWhen connected When not connectedAppendix A. RS232 Port Interface RS232 Port Interface Connectors Appendix B. SpecificationsPhysical / Environmental Power Models RSM-32 and RSM-32DCAppendix C. Customer Service Trademarks Used in this Manual Trademark and Copyright InformationTacacs Dhcp IndexIndex-2 Index-3 Index-4