Configuration
STATIC ROUTES:
1.
2.
3.
4.
5.
6.
7.
8.
Enter: #<CR> to select menu,
<ESC> for previous menu ...
Figure 5.15: Static Route Menu (Text Interface)
Figure 5.16: Static Route Menu (Web Browser Interface)
5.8.4.Static Route
The Static Route menu allows you to type in Linux routing commands that will be automatically executed each time that the unit powers up or reboots. In the Text Interface, the Static Route menu is accessed via item 6 in the Network Configuration menu. In the Web Browser Interface, the Static Route menu is accessed by first clicking the Network Configuration link and then clicking the Static Route link.
To access the Static Route Menus, proceed as follows:
•Text Interface: Type /N and press [Enter] to display the Network Parameters Menu (Figure 5.9.) At the Network Parameters Menu, type 6 and press [Enter]. The Static Route Menu should appear as shown in Figure 5.15.
•Web Browser Interface: Click on the "Network Configuration" link on the left hand side of the RSM Home screen to display the Network Configuration menu (Figure 5.10). From the Network Configuration Menu, Click the Static Route link to display the menu shown in Figure 5.16.