Western Telematic RSM-8, RSM-32DC, RSM-16DC manual Unit Description, Front Panel

2. Unit Description

2.1. Front Panel

	www.wti.com								RSM-8
ON	RDY			CONNECTIONS					Remote
CLEAR	SET	2	3	4	5	6	7	8	Site Manager
	1

1 2 3 4 5

Figure 2.1: Instrument Front Panel (Model RSM-8 Shown)

CLEAR: Restarts the RSM without changing user-selected parameter settings.

Note: When Clear is pressed, all ports will be disconnected.

ON: Lights when AC Power is applied.

SET: Used to Initialize the RSM to default parameters. To initialize the RSM, press and hold the SET button for approximately five seconds.

Notes:

•During initialization, all port LEDs will flash ON three times.

•After initialization, all command-selected parameters will be cleared, and the RSM will revert to the default parameters. The default "super" user account will also be restored.

RDY: (Ready) Flashes to indicate unit is operational.

ACTIVITY LEDs: A series of LEDs, which light to indicate data activity at the corresponding port.

•RSM-8 units include 8 Activity LEDs

•RSM-16 and RSM-16DC units include 16 Activity LEDs

•RSM-32 and RSM-32DC units include 32 Activity LEDs.

2-1