Precautions
HT-SB500
General
Please ensure that the equipment is positioned in a well- ventilated area and ensure that there is at least 10 cm (4") of free space along the sides and top of the equipment.
10 cm (4") | 10 cm (4") 10 cm (4") | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use the speaker on a firm, level surface free from vibration. Keep the speaker away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise.
Do not place anything on top of the speaker.
Do not expose the speaker to moisture, to temperatures higher than 60°C (140°F) or to extremely low temperatures. If your system does not work properly, disconnect the AC power lead from the wall socket. Plug the AC power lead back in, and then turn on your system.
In case of an electrical storm, unplug the speaker for safety. Hold the AC power plug by the head when removing it from the wall socket, as pulling the lead can damage internal wires. The AC power plug is used as a disconnect device and shall always remain readily operable.
Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility.
This speaker should only be used within the range of 5°C - 35°C (41°F - 95°F).
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
Attention should be drawn to the environmental aspects of battery disposal.
The apparatus is designed for use in moderate climate.
Do not use an external power supply other than the 12V DC supplied with this unit as it may be damaged.
SHARP is not responsible for damage due to improper use. Refer All servicing to a SHARP authorised service centre.
Warning:
The voltage used must be the same as that specified on this speaker. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this speaker with a voltage other than that which is specified. The supplied AC/DC adaptor contains no user serviceable parts. Never remove covers unless qualified to do so.
It contains dangerous voltages, always remove mains plug from the main outlet socket before any service operation or when not in use for a long period.
The AC/DC adaptor supplied with the
Never use an AC/DC adaptor other than the one specified. Otherwise, problem or serious hazards may be created.
Volume control
The sound level at a given volume setting depends on speaker efficiency, location and various other factors. It is advisable to avoid exposure to high volume levels. Do not turn the volume on to full at switch on. Listen to music at moderate levels.
Precaution in using on the touch panel
Do not use rough material to wipe the touch panel.
Do not press the pad too hard, it can damage the touch sensor.
ENGLISH