Speaker preparation
HT-SB500
Make sure to unplug the AC power lead before installing the speaker or changing the position.
Select from three installation methods according to the preferred
Caution:
When using these spikes on glossy or slippery table such as on glass top, stick foot cushions at the bottom of the spikes to avoid slippage.
ENGLISH
position.
Using spikes
You may choose from the two different spike lengths provided: 25 mm and 30 mm.
Nuts (secured on 30 mm spikes) must be used when installing either the 25 mm or 30 mm spikes.
The speaker can be levelled by adjusting the spikes and nuts.
Option 2
Option 1
Tighten all spikes as shown
Notes:
Option 1 or option 2 indicates spike positions based on LCD TV stand.
When attaching the spikes, place the speaker on a cushion or soft cloth to avoid damage.
Using foot cushions
Option 2
Option 1
Attach foot cushions as shown
Note:
Option 1 or option 2 foot cushion positions based on LCD TV stand.
Preparation for Use