Sharp HT-SB500 Connecting to a TV with Headphone socket, To select Line in 1 function

HT-SB500

Speaker connections to TVs (continued)

ENGLISH

Connecting to a TV

If the TV/monitor has an audio output, connect it to the LINE IN 1 sockets on the rear of the speaker.

To select LINE IN 1 function:

On speaker: Press FUNCTION button repeatedly until “L1” is displayed.

On remote control: Press LINE 1-2 button repeatedly until “L1” is displayed.

Connecting to a TV (with Headphone socket)

If the TV/monitor has headphone socket, connect it to the LINE IN 2 socket on the rear of the speaker.

To select LINE IN 2 function:

On speaker: Press FUNCTION button repeatedly until “L2” is displayed.

On remote control: Press LINE 1-2 button repeatedly until “L2” is displayed.

for Use

TV

TV

To audio output sockets

HEADPHONE

To HEADPHONE socket

Preparation

E-11

RCA cable (supplied)	Audio cable (not supplied)
To LINE IN 1	To AUDIO LINE
sockets	IN 2 socket

Speaker

Speaker

Notes:

If the TV volume is continuously in low level, the speaker will automatically power off. Increase the TV output volume to enjoy the sound from the speaker.

If the speaker volume is continuously in very high level, the speaker will mute and recover after several seconds.

The information display on the sound bar system will not display anything when increasing or decreasing the volume level.