NEC nec specifications General Service Features

Page 30

General Service Features

•This service cannot be used with the Central Office line (DIRECT IN TERMINATION) or a call via the Attendant Console.

Note 5: While the Attendant Console is calling a PS, the services associated with Out of Zone such as CALL FORWARDING PS INCOMING CALL INCOMPLETE [C-155], AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE [A-129] and AUTOMATIC ANNOUNCEMENT - DISCONNECTED PS OUT OF ZONE [A-128] are not available.

When an Attendant calls a PS, the individual Attendant number can be displayed on the LCD of the PS. However, “OPR” cannot be displayed on the LCD of the PS.

Note 6: When the PS is assigned as the target station of DIRECT IN TERMINATION (DIT) [D-7]:

•When the PS is Out of Zone (Out of Zone or in POWER OFF state), the calling party hears Ringback Tone.

Besides, if AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE [A-129] is assigned to the PS, the calling party does not hear the Out of Zone Announcement, but hears Ringback Tone instead.

•Even if a PS user moves Out of Zone while the talk between the corresponding PS and a subscriber of the Central Office line is in progress, AUTOMATIC ANNOUNCEMENT - DISCONNECTED PS OUT OF ZONE [A-128] cannot be heard by the subscriber outside, but Busy Tone is heard instead. The caller continues hearing Ringback Tone.

•In a call where a PS is engaged, a third-party intrusion into this line is not available upon the activation of CALL WAITING.

•When a call through DIT is transferred to a PS or a station upon the activation of CALL FORWARDING PS INCOMING CALL IMCOMPLETE [C-155], the calling party hears Ringback Tone if the target PS or station is Out of Zone or in the lock-out state.

•PS is unable to be handed over when it is ringing. When the transceiver zone of the PS changes over, the called PS stops ringing, and the calling party hears Ringback Tone.

•In the FCCS network, PS must be called with Station Number.

Note 7: An incoming call from the Tie Line trunk rings the same as a station call.

Note 8: See STACK DIALING - STATION for the PS feature.

Note 9: PS cannot be used for the Night station.

Note 10: PS can activate this feature only for the Attendant Console.

Note 11: Remote Access to System: Terminating side is PS:

•When the PS is Out of Zone (Out of Area or in POWER OFF state), the calling party encounters Busy Tone, but call termination is not retried.

If the AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE [A-129] is set to the PS, the calling party does not hear Out of Zone Announcement. The calling party hears Busy Tone, but is not allowed to try a call termination again.

•If a PS user moves Out of Zone while talking with a subscriber of the Central Office line, AUTOMATIC ANNOUNCEMENT - DISCONNECTED PS OUT OF ZONE [A-128] cannot be heard by the subscriber outside. Busy Tone is heard.

•When a call activated by REMOTE ACCESS TO SYSTEM is transferred to a certain PS or a station to which CALL FORWARDING PS INCOMING CALL IMCOMPLETE [C-155] is set and when the transferred party is Out of Zone or in the lock-out state, the calling party hears Busy Tone.

•PS is not allowed to be handed over while ringing. When the called PS is ringing with REMOTE ACCESS TO SYSTEM in service and at the same time, its transceiver zone is switched over, the PS stops ringing and the calling party hears Busy Tone.

Note 12: See PRESET DIALING for the PS feature.

NEAX2400 IPX Wireless Features and Specifications

Page 25

NDA-24313, Issue 1

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Wireless Features and Specifications NEC America, IncLiability Disclaimer NEAX2400 IPX NEAX2400 IPX This page is for your notes Wireless Specification in NEAX2400 IPX PCNService Conditions Wireless Features 131128 General Service Features CcisANI PRI Call Forwarding Don’t Answer General Service Features DIT 119 Data Interface Automatic Answer General Service Features General Service Features Expanded Multiple Line Operation General Service Features MAT Ccis Multiple Call Forwarding Busy Line Outgoing Trunk Queuing Ccis Outgoing Trunk Queuing Deluxe RS-464A PAD General Service Features General Service Features Ccis General Service Features General Service Features NDA-24313, Issue Radio Channel Changeover General Description130 Speech Scrambling Out Of Cell Indication Automatic Release Out Of Cell Calls PS Authentication PS Location Registration Overlap Dialing Preset Dialing Individual PS Calling 23Handover 154 Dtmf Signal Sender 156 Consultation Hold Flexible PS Numbering PS Service Class PS-to-Station Calling 131 Stack Dialing Station 132 Speed Calling Station Automatic Announcement Disconnected PS Out Of Zone Automatic Announcement Called PS Out of Zone 129 Service Conditions cont’d 155 Dterm Psii Two Line Operation Name Display Intra-Node Call Name Display Intra-Node Call Ccis Number Sharing Interactions Voice Mail Indication VMI Wireless Analog Adjunct Connection AvailableService Conditions cont’d Isdn Roaming 931a Tie Line 161 Call Forwarding Dropped Calls 161 Call Forwarding Dropped Calls Automatic Announcement Called PS OUT of Zone Isdn Data Communications 32 kbps Element After Conversion Conditions between PBX and ZT 137 Authorization Code Dterm Psii PAD Lock166 Call Park Dterm Psii Call Park Dterm Psii 166 Group Call Automatic Conference 20-Party Service Conditions cont’d Short Text Messaging Service STM Service Short Text Messaging Service STM Service 134 This page is for your notes Movement of PS in NEAX2400 IPX PCS CommunityStand-by Condition Condition Roaming This page is for your notes
Top Page Image Contents