NEC nec specifications Number Sharing

Page 55

N-45

Number Sharing

 

 

N-45

Number Sharing

General Description

This feature allows the Dterm user to use a PS as a Sub Station. In this feature, the Dterm and PS are referred as Main Station and Sub Station, respectively. The main functions of this feature are as follows:

1.Call Forwarding - All Calls to PS - When the Dterm (Main Station) user presses the feature key or dials the access code, Call Forwarding - All Calls to PS (Sub Station) is set or cancelled. This function can also be set or cancelled by dialing the access code from the PS (Sub Station).

2.Dterm - Telephone Number Display - Even if a call is connected to the PS (Sub Station), the telephone number of the Dterm (Main Station) is displayed on the other party’s LCD.

3.Billing Information - Even if a call is originated from the PS (Sub Station), billing information is recorded as a call origination from the Dterm (Main station).

4.Voice Mail Indication - Even if a call is transferred from the PS (Sub Station) to the Voice Mail System, the voice mail is recorded on the mail box of the Dterm (Main Station). The system controls Message Waiting Indication on both the Dterm (Main Station) and PS (Sub Station).

Operating Procedure

To set from the Dterm

1.While in idle state, press the feature key for this feature. The PS Transfer lamp lights on the Dterm (Main Station).

2.All the calls to the Dterm (Main Station) are forwarded to the PS (Sub Station).

To cancel from the Dterm

1.While the Sub Station Transfer lamp lights, press the feature key for this feature. The PS Transfer lamp goes off on the Dterm (Main Station).

2.This feature is cancelled.

To set from the PS

1.While in idle state, dial the access code for this feature and receive Service Set Tone. The PS Transfer lamp lights on the Dterm (Main Station).

2.All the calls to the Dterm are forwarded to the PS (Sub Station).

To cancel from the PS

1.While this feature is set, dial the cancel code for this feature and receive Service Set Tone. The PS Transfer lamp goes off on the Dterm (Main Station).

2.This feature is cancelled.

Service Conditions

1.This feature is available for Series 7300 or later software.

2.A telephone number must be assigned to both Main and Sub Stations.

3.The PS cannot be assigned as Main Station.

4.Any combination of Main Station and Sub Station is available in a FCCS network.

5.The access code for an outgoing call cannot be assigned as a telephone number of the Sub Station.

6.Dialing the access code for this feature is available only for Main Station and Sub Station. Any other station or trunk cannot set this feature.

7.The Dterm user can set this feature using any line on the Dterm. Even if the Dterm user sets this feature using a sub line, this feature is set to My Line.

8.The “PS Transfer” key is available only when the Dterm is in idle state.

Page 50

NEAX2400 IPX Wireless Features and Specifications

NDA-24313, Issue 1

Page 54 Page 56
Image 55
Page 54 Page 56
Contents NEC America, Inc Wireless Features and SpecificationsLiability Disclaimer NEAX2400 IPX NEAX2400 IPX This page is for your notes PCN Wireless Specification in NEAX2400 IPXService Conditions 131 Wireless Features128 Ccis General Service FeaturesANI PRI Call Forwarding Don’t Answer General Service Features DIT 119 Data Interface Automatic Answer General Service Features General Service Features Expanded Multiple Line Operation General Service Features MAT Ccis Multiple Call Forwarding Busy Line Outgoing Trunk Queuing Ccis Outgoing Trunk Queuing Deluxe RS-464A PAD General Service Features General Service Features Ccis General Service Features General Service Features NDA-24313, Issue General Description Radio Channel Changeover130 Speech Scrambling Out Of Cell Indication Automatic Release Out Of Cell Calls PS Authentication PS Location Registration Overlap Dialing Preset Dialing Individual PS Calling 23Handover 154 Dtmf Signal Sender 156 Consultation Hold Flexible PS Numbering PS Service Class PS-to-Station Calling 131 Stack Dialing Station 132 Speed Calling Station Automatic Announcement Disconnected PS Out Of Zone Automatic Announcement Called PS Out of Zone 129 Service Conditions cont’d 155 Dterm Psii Two Line Operation Name Display Intra-Node Call Name Display Intra-Node Call Ccis Number Sharing Interactions Voice Mail Indication VMI Available Wireless Analog Adjunct ConnectionService Conditions cont’d Isdn Roaming 931a Tie Line 161 Call Forwarding Dropped Calls 161 Call Forwarding Dropped Calls Automatic Announcement Called PS OUT of Zone Isdn Data Communications 32 kbps Element After Conversion Conditions between PBX and ZT PAD Lock 137 Authorization Code Dterm Psii166 Call Park Dterm Psii Call Park Dterm Psii 166 Group Call Automatic Conference 20-Party Service Conditions cont’d Short Text Messaging Service STM Service Short Text Messaging Service STM Service 134 This page is for your notes PCS Community Movement of PS in NEAX2400 IPXStand-by Condition Condition Roaming This page is for your notes
Top Page Image Contents