NEC nec specifications Automatic Announcement Called PS Out of Zone 129

Page 50

Automatic Announcement - Called PS Out of Zone

A-129

 

 

A-129 Automatic Announcement - Called PS

Out of Zone

C-155 Call Forwarding PS Incoming Call Incomplete

General Description

When a call cannot be terminated due to the called Dterm PS series which is Out of ZT or whose power is OFF, the system automatically answers the call and provides an announcement to notify the calling party that the called Dterm PS is Out of Zone or if the CALL FORWARDING PS INCOMING CALL INCOMPLETE is set to a given destination, the aborted call can be transferred to the pre programmed station or Dterm PS.

Operating Procedure

No manual operation is required.

Service Conditions

1.CALL FORWARDING PS INCOMING CALL INCOMPLETE can be programmed and cancelled by the Dterm PS with pressing Access Code + transferred telephone number. Note

2.In the case where the Dterm PS is Out of Zone, or its power is OFF, and the call is an incoming call from the Central Office directly or the Central Office call via the Attendant Console, the caller does not hear AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE, and hears the following tones.

• DIT:

Ringback Tone is heard

•REMOTE ACCESS TO SYSTEM: Busy Tone is heard

•

AUTOMATED ATTENDANT:

Busy Tone is heard

•

ATTENDANT CONSOLE:

Busy Tone is heard

•

ISDN - DID ADDRESSING:

Announcement of ISDN (PSTN) is heard.

3.One system is given one kind of recorded message for AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE.

4.On the condition that both AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE and CALL FORWARDING PS INCOMING CALL INCOMPLETE are assigned to a Dterm PS, priority is

given to CALL FORWARDING PS INCOMING CALL INCOMPLETE.

5.If an incoming call terminated at the very moment when a Dterm PS series user is setting CALL FORWARDING PS INCOMING CALL INCOMPLETE with a Pre-Set Dialing (before OFF-HOOK), the procedure so far becomes invalid.

6.If the another transfer service is set to the target destination party of CALL FORWARDING PS INCOMING CALL INCOMPLETE, the call is transferred to the last end party.

7.When a call is transferred to another Dterm PS activated by CALL FORWARDING PS INCOMING CALL INCOMPLETE and when the call termination is not completed, the call can be transferred to another destination party if the CALL FORWARDING PS INCOMING CALL INCOMPLETE is set. If the AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE is assigned, the caller hears the announcement. When both CALL FORWARDING PS INCOMING CALL INCOMPLETE and AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE are not programmed, the caller hears Busy Tone.

8.AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE does not allow the incoming call from outside to be connected to announcement trunk. The calling party hears Ringback Tone.

NEAX2400 IPX Wireless Features and Specifications

Page 45

NDA-24313, Issue 1

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Wireless Features and Specifications NEC America, IncLiability Disclaimer NEAX2400 IPX NEAX2400 IPX This page is for your notes Wireless Specification in NEAX2400 IPX PCNService Conditions Wireless Features 131128 General Service Features CcisANI PRI Call Forwarding Don’t Answer General Service Features DIT 119 Data Interface Automatic Answer General Service Features General Service Features Expanded Multiple Line Operation General Service Features MAT Ccis Multiple Call Forwarding Busy Line Outgoing Trunk Queuing Ccis Outgoing Trunk Queuing Deluxe RS-464A PAD General Service Features General Service Features Ccis General Service Features General Service Features NDA-24313, Issue Radio Channel Changeover General Description130 Speech Scrambling Out Of Cell Indication Automatic Release Out Of Cell Calls PS Authentication PS Location Registration Overlap Dialing Preset Dialing Individual PS Calling 23Handover 154 Dtmf Signal Sender 156 Consultation Hold Flexible PS Numbering PS Service Class PS-to-Station Calling 131 Stack Dialing Station 132 Speed Calling Station Automatic Announcement Disconnected PS Out Of Zone Automatic Announcement Called PS Out of Zone 129 Service Conditions cont’d 155 Dterm Psii Two Line Operation Name Display Intra-Node Call Name Display Intra-Node Call Ccis Number Sharing Interactions Voice Mail Indication VMI Wireless Analog Adjunct Connection AvailableService Conditions cont’d Isdn Roaming 931a Tie Line 161 Call Forwarding Dropped Calls 161 Call Forwarding Dropped Calls Automatic Announcement Called PS OUT of Zone Isdn Data Communications 32 kbps Element After Conversion Conditions between PBX and ZT 137 Authorization Code Dterm Psii PAD Lock166 Call Park Dterm Psii Call Park Dterm Psii 166 Group Call Automatic Conference 20-Party Service Conditions cont’d Short Text Messaging Service STM Service Short Text Messaging Service STM Service 134 This page is for your notes Movement of PS in NEAX2400 IPX PCS CommunityStand-by Condition Condition Roaming This page is for your notes
Top Page Image Contents