| Dterm PSII Two Line Operation | |
| Dterm PSII Two Line Operation |
|
General Description
This feature allows for the appearance of two lines on the line (L1 and L2) keys of the PS.
Operating Procedure
No manual operation is required.
Service Conditions
1.This feature is available for Series 7300 or later software.
2.Two kinds of lines can appear on the PS: My Line and Sub Line. These lines are associated with the telephone numbers assigned to the port on the interface circuit.
L1 key: | My Line |
L2 key: | Sub Line |
3.When a PS becomes Out of Zone state while terminating to Sub Line, the call is disconnected by release timer about one minute after.
4.When a PS user places a call on hold and presses the END key, the line lamp on the PS goes OFF. The PS is recalled when the recall timer expires.
5.Voice Mail Indication (VMI) is not available for Sub Line.
6.When a PS is connected to a PS, Dual Hold is not available.
7.Blind Transfer to Sub Line is not available.
8.When one Line is connected, Blind Transfer to the other line is not available.
9.When transferring a call from a PS, the PS cannot place the third party on Hold.
The PS cannot activate Call Hold while connected with the station holding another call.
10.A PS cannot activate Call Hold when:
a.) Call Waiting is set to the PS b.) the PS sets Call Waiting
c.) Call Waiting is set to the station connected with the PS
11.Call Waiting cannot be activated while the called PS is placed on Hold.
NEAX2400 IPX Wireless Features and Specifications | Page 47 |
|