NEC nec specifications Call Forwarding Dropped Calls

Page 63

C-161

Call Forwarding - Dropped Calls

 

 

Service Conditions (cont’d)

5.When a call is currently being transferred by this feature, the forwarded party (not the forwarding destination but the party first connected to the Squelch PS) hears the Ringback Tone.

6.When this feature has been activated during a two-way call between a PS and a station (including PS), the station now being transferred to the forwarding destination, cannot use “TRF” or “HLD” keys (restriction is imposed).

7.This feature can be applied to:

•a basic two-way connection between a PS and a station (including PS)

•a basic two-way connection between a PS and a trunk (analog, ISDN, CCIS, TLT)

8.When forwarding destination of this feature can be:

•a PS

•an analog/Dterm station

•an Attendant

•a trunk (COT)

•Tie Line

9.When a call terminates just in the middle of “service set” access code dialing (Pre-set Dialing: before going off-hook), the key operation until this moment goes all null and void.

10.This feature is not available for a two-way connection between a PS and an ATTCON/DESKCON.

11.When a PS attempts an OG call and it ends up in a Squelch Disconnection before connected to the self- node/other node trunk, this feature is not activated.

12.If a Squelch Disconnection occurs just during the following state, this feature is not activated:

•A PS is placed on hold during a two-way connection with a station (including PS)

•A station (including PS) is placed on hold during a two-way connection with a PS

13.When a PS encounters a Squelch Disconnection during a two-way connection with a UCD station, this feature is not available.

14.When this feature is activated and the forwarded party does not answer, the following occurs:

•When CALL FORWARDING - DON’T ANSWER is assigned at the forwarded party

After a certain period of no answer, the call is shifted to the destination of CALL FORWARDING - DON’T ANSWER.

•When CALL FORWARDING - DON’T ANSWER is not assigned at the forwarded party Recall to the Squelch PS is not made, and the forwarded party continues to ring.

15.When a call is forwarded by this feature and also is shifted to another destination, the forwarding kind to be notified to the destination is “CALL FORWARDING PS INCOMING CALL INCOMPLETE”.

16.When this feature is activated, the LCD indication on the Dterm (forwarded party) is identical to that of

CALL FORWARDING PS INCOMING CALL INCOMPLETE.

17.When a Squelch Disconnection occurs simultaneously at both PSs in a two-way connection, this feature is activated by neither PS.

18.The forwarding kind to be reported to MCI is “CALL FORWARDING - DON’T ANSWER”.

19.The assigned data for this feature can be backed up on the HDD/FDD of the PBX.

20.The forwarding destination of this feature is not designated by the system data.

21.This service does not support the unrestricted digital data.

22.Service conditions for two-line Dterm PS are shown below:

a.)

This service can be assigned to both lines of this type PS.

b.)

When a Squelch Disconnection occurs while a line is in a two-way connection and the other line

 

is placed on hold, this service is applied to the former line only (two-way connection line only).

 

 

Page 58

NEAX2400 IPX Wireless Features and Specifications

NDA-24313, Issue 1

Page 62 Page 64
Image 63
Page 62 Page 64
Contents NEC America, Inc Wireless Features and SpecificationsLiability Disclaimer NEAX2400 IPX NEAX2400 IPX This page is for your notes PCN Wireless Specification in NEAX2400 IPXService Conditions 131 Wireless Features128 Ccis General Service FeaturesANI PRI Call Forwarding Don’t Answer General Service Features DIT 119 Data Interface Automatic Answer General Service Features General Service Features Expanded Multiple Line Operation General Service Features MAT Ccis Multiple Call Forwarding Busy Line Outgoing Trunk Queuing Ccis Outgoing Trunk Queuing Deluxe RS-464A PAD General Service Features General Service Features Ccis General Service Features General Service Features NDA-24313, Issue General Description Radio Channel Changeover130 Speech Scrambling Out Of Cell Indication Automatic Release Out Of Cell Calls PS Authentication PS Location Registration Overlap Dialing Preset Dialing Individual PS Calling 23Handover 154 Dtmf Signal Sender 156 Consultation Hold Flexible PS Numbering PS Service Class PS-to-Station Calling 131 Stack Dialing Station 132 Speed Calling Station Automatic Announcement Disconnected PS Out Of Zone Automatic Announcement Called PS Out of Zone 129 Service Conditions cont’d 155 Dterm Psii Two Line Operation Name Display Intra-Node Call Name Display Intra-Node Call Ccis Number Sharing Interactions Voice Mail Indication VMI Available Wireless Analog Adjunct ConnectionService Conditions cont’d Isdn Roaming 931a Tie Line 161 Call Forwarding Dropped Calls 161 Call Forwarding Dropped Calls Automatic Announcement Called PS OUT of Zone Isdn Data Communications 32 kbps Element After Conversion Conditions between PBX and ZT PAD Lock 137 Authorization Code Dterm Psii166 Call Park Dterm Psii Call Park Dterm Psii 166 Group Call Automatic Conference 20-Party Service Conditions cont’d Short Text Messaging Service STM Service Short Text Messaging Service STM Service 134 This page is for your notes PCS Community Movement of PS in NEAX2400 IPXStand-by Condition Condition Roaming This page is for your notes
Top Page Image Contents