Call Forwarding PS Incoming Call Incomplete | |
|
|
Service Conditions (cont’d)
9.The incoming incomplete call to a Dterm PS can be transferred to other Dterm PS’s, stations, Attendant Consoles, Central Office and TIE lines when CALL FORWARDING PS INCOMING CALL INCOMPLETE is in service.
10.The timer value of incoming incomplete call is approximately eight seconds, time duration until the system recognizes that the Dterm PS is Out of Zone from an incoming call attempt to the Dterm PS.
11.CALL FORWARDING PS INCOMING CALL INCOMPLETE is not activated in the case of the incoming call from ISDN and the incoming call via the Attendant Console. The caller encounters AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE or Busy Tone.
12.When a forwarded station for CALL FORWARDING PS INCOMING CALL INCOMPLETE sets CALL FORWARDING - ALL CALLS to the announcement, CALL FORWARDING PS INCOMING CALL INCOMPLETE is not activated but the caller hears Busy Tone.
13.In a FCCS network, every node must have one or more Announcement Trunk.
14.When incoming call comes from ISDN network, and the timer (T310) of the network side is expired, the caller may hear the Announcement from network side.
15.In a FCCS network, CALL FORWARDING destination station must have a telephone number.
Note: CALL FORWARDING PS INCOMING CALL INCOMPLETE is cancelled by system initialization if the data is not saved on the Hard Disk.
Page 46 | NEAX2400 IPX Wireless Features and Specifications |
|