NEC nec specifications Preset Dialing

Page 39

P-63	Preset Dialing

P-63	Preset Dialing

General Description

This service allows the Dterm PS series user to confirm the numbers to be dialed before originating calls.

Operating Procedure

To originate a call

1.Dial the desired number. The number is stored and displayed on the LCD.

2.After confirming the numbers, press the SEND or L1 key. The numbers are displayed on the LCD throughout the conversation.

Service Conditions

1.A maximum of 24 digits (numbers 0 to 9, #, *, and pause) can be stored. (A maximum of 12 digits can be displayed on the LCD. When more than 12 digits are dialed, the digits move from right to left, displaying only the most recently dialed digits.)

2.If a wrong number is dialed, press the CLR or CLEAR key. The number just dialed will be erased. If the

CLR or CLEAR key is pressed for more than two seconds, the numbers will be erased successively. Also, if no number is entered for 20 seconds, the service is cleared, and the Dterm PS returns to the idle state

(stand by status).

3.If the user dials a number after pressing the SEND or L1/L2 key, it will be recognized as a PB signal sending.

4.PS AUTHENTICATION is activated for every call origination.

Page 34	NEAX2400 IPX Wireless Features and Specifications
	NDA-24313, Issue 1

Image 39

Contents NEC America, Inc Wireless Features and SpecificationsLiability Disclaimer NEAX2400 IPX NEAX2400 IPX This page is for your notes PCN Wireless Specification in NEAX2400 IPXService Conditions 131 Wireless Features128 Ccis General Service FeaturesANI PRI Call Forwarding Don’t Answer General Service Features DIT 119 Data Interface Automatic Answer General Service Features General Service Features Expanded Multiple Line Operation General Service Features MAT Ccis Multiple Call Forwarding Busy Line Outgoing Trunk Queuing Ccis Outgoing Trunk Queuing Deluxe RS-464A PAD General Service Features General Service Features Ccis General Service Features General Service Features NDA-24313, Issue General Description Radio Channel Changeover130 Speech Scrambling Out Of Cell Indication Automatic Release Out Of Cell Calls PS Authentication PS Location Registration Overlap Dialing Preset Dialing Individual PS Calling 23Handover 154 Dtmf Signal Sender 156 Consultation Hold Flexible PS Numbering PS Service Class PS-to-Station Calling 131 Stack Dialing Station 132 Speed Calling Station Automatic Announcement Disconnected PS Out Of Zone Automatic Announcement Called PS Out of Zone 129 Service Conditions cont’d 155 Dterm Psii Two Line Operation Name Display Intra-Node Call Name Display Intra-Node Call Ccis Number Sharing Interactions Voice Mail Indication VMI Available Wireless Analog Adjunct ConnectionService Conditions cont’d Isdn Roaming 931a Tie Line 161 Call Forwarding Dropped Calls 161 Call Forwarding Dropped Calls Automatic Announcement Called PS OUT of Zone Isdn Data Communications 32 kbps Element After Conversion Conditions between PBX and ZT PAD Lock 137 Authorization Code Dterm Psii166 Call Park Dterm Psii Call Park Dterm Psii 166 Group Call Automatic Conference 20-Party Service Conditions cont’d Short Text Messaging Service STM Service Short Text Messaging Service STM Service 134 This page is for your notes PCS Community Movement of PS in NEAX2400 IPXStand-by Condition Condition Roaming This page is for your notes