NEC nec specifications Name Display Intra-Node Call

N-43	Name Display - Intra-Node Call
N-43	Name Display - Intra-Node Call

General Description

This feature allows a PS to indicate user information corresponding to the calling Physical Station Number while engaged in a station-to-station call.

Operating Procedure

•When originating a station-to-station call: LCD display of the calling station:

H.TARO

DIR SPD LNR

LCD display of the called station:

H. TARO
DIR	SPD	LNR

•When a station call has been transferred to another station by Call Forwarding - All Calls/Busy Line/Don’t Answer/PS - Incoming Incomplete:

LCD display of the calling station:

	CF:	H. TARO
	DIR	SPD	LNR
LCD display of the called station:
	CF:	M. TARO
	DIR	SPD	LNR

Service Conditions

1.This feature is available for Series 7300 or later software.

2.User information corresponding to the Physical Station Number that can be displayed on the LCD is a maximum of 16 digits.

3.User information is displayed on the LCD, indented to the left. The information may consist of English alphabets, numeric characters, and most keyboard symbols.

4.When user information is 12 digits or more, the first or last part of information can be displayed by key operation (Refer to the User Guide for the PS).

5.This service and NAME DISPLAY by Open Application Interface cannot be activated concurrently.

6.This service and NAME DISPLAY service for Dterms can be activated concurrently.

7.Eight-digit display or 16-digit display is selectable by System Data, but cannot be used concurrently.

8.If the PS station has no name programmed for NAME DISPLAY - INTRA-NODE CALL service, the Physical Station Number is displayed in the name field.

9.NAME DISPLAY - INTRA-NODE CALL is available for Station-to-Station Connection, Call Forwarding - All Calls/Busy Line/Don’t Answer/PS - Incoming Incomplete, Call Waiting, and Call Transfer.

Page 48	NEAX2400 IPX Wireless Features and Specifications
	NDA-24313, Issue 1