Bosch Appliances D9412GV3 manual Area# Is On, Area# Not Ready, Area# Is Off, Area# Account Is On

D9412GV3/D7412GV3 Program Entry Guide 2.0 Panel and Area Wide Parameters

EN 57

Area# Is On

Default:	Refer to the program record sheet
Selection:	Sixteen alphanumeric characters

Enter the text for this area that appears when the area is master armed or master instant armed and other areas sharing the same account number are not yet master armed. This display does not appear when the area is perimeter armed.

Area# Not Ready

Default:	Refer to the program record sheet
Selection:	Sixteen alphanumeric characters

Enter the text for this area that displays when the area is disarmed but points are faulted.

Area# Is Off

Default:	Refer to the program record sheet
Selection:	Sixteen alphanumeric characters

Enter the text for this area that displays when the area is disarmed and no points are faulted.

Area# Account Is On

Default:	Refer to the program record sheet
Selection:	Sixteen alphanumeric characters

Enter the text that appears when all areas sharing the same account number are master armed. The ACCOUNT IS ON text appears at all keypads assigned to these areas, if more than one area has the same account number. The ACCOUNT IS ON text also appears if only one area in the system is used. Refer to the prompts CC# Area Assign and Area # Account Is On in Section 2.9.1 Keypad (Command Center) Assignment on page 50. When all areas in the account are master armed, the Area # Is On text is replaced by the ACCOUNT IS ON text if the area is armed before all other areas with the same account number.

Blank Entry

A blank entry disables the ACCOUNT IS ON display for this area. An account wide area shows the AREA

#IS ON text instead of the ACCOUNT IS ON text.

Unique ACCOUNT IS ON Text

Each area can have unique ACCOUNT IS ON text, or you can program the same text in each area of the account so when all the areas in the account are armed, they all show the same text.

D1260 Series Keypad

Although it is not programmed in this area, the D1260 Series keypad can display up to sixteen characters for an Area Name on line 1 of its display. The Area Text (Area # Is Off, Area # Not Ready, Area # Is On, and Account # Is On) programmed in this module appears on line 2 of the D1260 Alpha V Keypad. When programming custom text, it should be logical to users viewing it on the D1260. For example, the Area Name Text can be programmed to display Front Office and the Area # Is Off text (programmed in this section) could be programmed to display Ready To Arm. The D1260 would then show on line 1 Front Office and on line 2, Ready To Arm.

2.9.3Custom Function

Use custom functions to simplify complex keystroke sequences entered at the keypad. These items are similar to speed dialing on a telephone. When the custom function appears on the keypad, a user can execute a request by pressing [ENTER]. You can have up to sixteen custom functions and restrict their use by area and authority level.

Each Custom Function ### item has sixteen characters of programmable text (CF### Text). When the Custom Function is assigned to the menu M## Function (refer to Section 2.11 Function List on page 77) the user can press [PREV] or [NEXT] to scroll to CF### Text. The user accesses the menu by pressing [MENU] on the keypad.

The user needs the appropriate authority level enabled for the L## C Function 128 to 143 in Section 2.10 User Interface on page 59, to use the custom function.

Consider the scope of the keypad used to access the Custom Function. Each Custom Function is enabled in the function menu by M## CC Address 1 [through 8] (refer to M## CC Address 1 [through 16] on page 78). If the Custom Function is not assigned to a specific keypad address, it does not appear in the menu.

Area # Name Text

Default:	Refer to the program record sheet
Selection:	Sixteen alphanumeric characters

Enter the text for this area's name. This text only displays on the D1260 series keypads.

Bosch Security Systems, Inc. 10/11 F01U170807-02