Bosch Appliances D9412GV3 manual Perimeter Delay, Watch Mode, Perimeter Partial, View Area Stat

D9412GV3/D7412GV3 Program Entry Guide 2.0 Panel and Area Wide Parameters

EN 61

Instant arms all perimeter points with point response that starts an instant alarm (refer to P## Pt Response in Section 3.2 Point Responses on page

91)in the area where the keypad is assigned. Entry and exit delays are not provided with this arming function. This function causes a Perimeter Delay point to act as a Perimeter Instant point.

For SIA CP-01 Compliance

This feature is not allowed in SIA CP-01 compliant installations.

Perimeter Delay

Default:	P
Selection:	-, E, or P
Function	Function Name	Alternate
No.		Keystroke
5	Perimeter Delay	[COMMAND][3]
	Arm

Delay arms all Perimeter points in the area where the keypad is assigned. Entry and exit delays are provided with this Arming function. This function does not cause a Perimeter Instant point to act as a Delay point.

Watch Mode

Default:	E
Selection:	-, E, or P
Function	Function Name	Alternate
No.		Keystroke
6	Watch Mode	[COMMAND][6]

This function informs you when a perimeter point or interior point that is programmed as P## Watch Point is faulted while the area is disarmed. Interior points do not emit a Watch Tone if the area is perimeter armed. This function provides keypad audible or visual and optional relay activation (refer to A # Watch Mode in Section 2.12.1 Area Relays on page 79).

Perimeter Partial

Use this function to arm normal perimeter points and force-bypass faulted perimeter points, regardless of their P## Bypassable setting. When these force- bypassed perimeter points return to normal, they automatically return to service, even if P## FA Returnable is set to No.

Perimeter Partial arming has entry and exit delays.

Perimeter Partial ignores the A# Force

Arm/Bypass Max entry in Section 2.8

Area Parameters on page 36.

Local Only Reporting: No Closing Report is sent to the central station, but a Perimeter Delay Closing Event is generated in the event log.

View Area Stat

Default:	P
Selection:	-, E, or P
	Function Name
Function		Alternate
No.		Keystroke
8	View Area Status	(Menu function
		only)

Use this function to view the armed status of all areas within the scope of the keypad assigned to this area. The armed states include A# AREA # IS OFF (disarmed), A# AREA # IS ON (master delay armed), ALL ON INSTANT (master instant armed), and AREA

#PERIMETER ON (perimeter instant armed or perimeter delay armed). All area types, master, associate, regular, and shared can be viewed using this function.

Default:	P
Selection:	-, E, or P
Function	Function Name	Alternate
No.		Keystroke
7	Perimeter Partial	[COMMAND][8]
	Arm

Bosch Security Systems, Inc. 10/11 F01U170807-02