Bosch Appliances D9412GV3 manual RPS Call Back, RPS Line Monitor, Answer Armed, Answer Disarmed

Page 34

D9412GV3/D7412GV3 Program Entry Guide 2.0 Panel and Area Wide Parameters

EN 34

RPS Call Back

Default:

No

Selection:

Yes or No

Yes

When the control panel hears the

 

correct RPS passcode, it hangs up

 

the phone, seizes the phone line,

 

then dials the programmed RPS

 

phone number (refer to the RPS Ph

 

prompt on page 35). This ensures

 

that the control panel only

 

communicates with RPS units

 

connected to the programmed phone

 

number.

 

If the call is answered manually, the

 

call back must be initiated manually.

 

 

No

The RPS session starts immediately.

 

No call back is required. The control

 

panel can engage in RPS sessions

 

when called from any phone number

 

and a proper RPS passcode is

 

identified.

 

 

This function allows the control panel, after it verifies the RPS passcode, to provide an additional level of security by hanging up and dialing the RPS phone number at the central station before allowing any upload or download.

When using the RPS Call Back feature, be sure to program the character “C” as the last digit in the RPS phone number when using DTMF Dialing.

RPS Line Monitor

Default:

Yes

Selection:

Yes or No

Yes

Allows the control panel to

 

communicate with RPS after the

 

answering machine answers the

 

phone.

 

 

No

Use No if the control panel does not

 

share the phone line with an

 

answering machine.

 

 

This program item enables a control panel that shares a phone line with an answering machine to communicate with RPS at the central station, even though the answering machine answers the phone. You must program Answer Armed or Answer Disarmed. The control panel must be in the correct armed state.

Program this item No if it causes false seizures of the phone line or if you do not use RPS. This indicates that a device using the same frequency tone is also using the phone line to which the control panel is connected.

If RPS Call Back is programmed Yes, the control panel hangs up the phone after the RPS tone and a proper RPS passcode is identified. It then calls the RPS phone number.

Answer Armed

Default:

Refer to the program record sheet

Selection:

0 to 15

 

 

0No answer.

1to 15 The control panel answers the phone after the specified number of rings when all areas are master armed.

Set the telephone ring counter to answer when all areas are master armed. If any area in the control panel is perimeter armed or disarmed, the Answer Disarmed ring counter is used.

For the purposes of answering the RPS phone call, the control panel considers Perimeter Armed a disarmed state..

Answer Disarmed

Default:

Refer to the program record sheet

Selection:

0 to 15

 

 

0No answer.

1to 15 The control panel answers the phone after the specified number of rings when any area in the system is in a perimeter armed or disarmed state.

Set telephone ring counter to answer when any area is in a perimeter armed or disarmed state.

For the purposes of answering the RPS phone call, the control panel considers Perimeter Armed a disarmed state.

Bosch Security Systems, Inc. 10/11 F01U170807-02

Page 33 Page 35
Image 34
Page 33 Page 35
Contents D9412GV3/D7412GV3 v8.11 and Higher System Requirements Type Styles Used in this ManualTable of Contents 147 TablesProgramming Prompts Directory 148 Literature Referenced Using this Program Entry GuideDifferences between the D9412GV3 and D7412GV3 Features Document Name Part NumberGuide to Programming Options D1255 Keypad Programming Menu and Page References D1260 Keypad Programming Menu and Page References Guide to UL 864 Programming Requirements D9412GV3/D7412GV3 Program Entry Guide 1.0 Introduction UL 864 Programming Recommendations Prompt Possible Settings For Ground Fault Enable SwitchRecommendation Phone For SIA CP-01 Compliance Call Waiting DisablePhone # D1255 D1260Phone Parameters Default Modem IIIa2 Selection Modem IIIa2 or Contact IDDefault Yes Selection Yes or No Phone # FormatD6000 User IDs and Zones Dtmf DialingModem IIIa2 Communication Format Data Point Numbers Buzz on Fail Alarm On FailPhone Supv Time Two Phone LinesCalled Party Disconnect Default Selection Yes or NoExpand Test Report Route Number Groups Which Has the Highest Priority?Programming a Duplicate Report Programming Primary and Backup DestinationsEnhanced Routing Routing Destination Communication FailuresRoute GRP 1 4 option # Primary DeviceRoute Group 1 4 option # Backup Device Fire Reports Selections Description Fire ReportsBurglar Reports Burglar ReportsUser Reports Selections Description User ReportsTest Reports Sending Test ReportsDiagnostics Reports Test Reports Selections DescriptionSelections Report Description Diagnostic ReportsRelay Reports Report Selections DescriptionAuto-Function Reports Selections Report Description Auto Function ReportsRPS Reports RPS Reports Selections Report DescriptionPoint Reports Selections Description Point ReportsUser Chng Reports User Change Reports Selections DescriptionAccess Reports Selections Report Description Access ReportsEvent Descriptions, Priorities, and Numbers Event Descriptions, Priorities, and Numbers Power Supervision Printer Parameters ## A1 through A# in Scope ## Access Event## Scope ## Fire Events## Usr Chng Evt RPS Parameters## Point Event RPS PasscodeLog % Full Default Selection 0 toContact RPS if Log % Full RPS Line Monitor Default Refer to the program record sheet SelectionRPS Call Back Answer ArmedRPS Phone # Default Blank Selection Blank or up to 24 charactersDefault Selection 300, 1200 RPS Modem SpeedMiscellaneous Area Parameters# Force Arm/Bypass Max Area# Account NumberArea On to Yes # Exit Dly Time # Delay Restorals# Exit Tone # Auto Watch# Duress Enable must be set to Yes # Duress EnableVerify Time to 60 sec # Area Type Disarming a Shared Area Shared-Area Characteristics Arming a Shared AreaAccess Control Readers Assigned to the Shared Area Shared Area Arming Sequence# Burg Time # Fire Time# Fire Pattern # Burg Pattern# Bell Test # Single RingRing # Account O/C # Auto Close # Disable O/C in Window# Area O/C # Fail to Open# Restrictd O/C  If Disable O/C in Window is# Fail to Close Exit Dly Time# Perimeter O/C Default Selection 0000 toArming Features # Latest Close Time# Early Ambush Parameter Setup RequirementTo Early Ambush Timer on D1255 Keypad# Exit Warning # Exit Restart# Arm No Exit # Exit Warning must be set to YesCmd Center Keypad Command Center# Entry Warning # Entry Warning must be set to YesCC# Supervised CC# Enhanced Command CenterDefault Selection 1 to 32 on D9412GV3 1 to 8 on D7412GV3 CC# Area AssignCC# A1 through A# in Scope CC# ScopeSame A# Account Number, CC# Enter Key Cycle Door CC# Enter Key RelayCC# Assign Door CC# Exit Tone CC# Trouble ToneCC# Entry Tone Trouble Tone to YesCC# Passcode Follows Scope CC# Arm Now WarningCC# Close Door ## Passcode ArmCC# Menu Key Lock CC# Cancel DisplayCC# Scroll Lock CC# Abort DisplayArea# Is Off Area# Is OnArea# Not Ready Area# Account Is OnCF### Key Strokes Custom FunctionCF### Text See .9.2 Area Text onUser Interface ExampleMaster Arm Instant Master Arm DelayPerimeter Instant Perimeter Partial Perimeter DelayWatch Mode View Area StatWalk Test Access Ctl LevelView Point Status Door ControlDel User Change Time/DateChange Passcode Extend CloseUser Cmd Bypass a PointPrint Log Unbypass a PointChange Relay Reset SensorsService Walk Remote ProgramInvisible Walk Test Default TextChange Skeds Function 128 throughAuthority Level Default Selection 1 toDefault Refer to the program record sheet Selection Or E ## Disarm## Watch Mode ## Master Arm Delay## Perimeter Delay ## Master Arm Instant## Walk Test ## View Memory## View Point Status ## Fire Test## Cycle Door ## Send Report## Door Control ## Unlock Door## Change Time/Date ## Access Control Level## Change Display ## Change Passcode## Extend Close ## Add User## Del User ## View Log## Bypass a Point ## Reset Sensors## Service Walk ## Change Relay## Change Skeds ## Default Text## Invisible Walk Test ## Passcode Arm ## C Function 128 through## Force Arm ## Area O/C## Disarm Level Default Refer to the program record sheet Selection C, or## Function Level Menu Item Function List## Function Relay Parameters ## CC Address 1 through# Fire Bell # Alarm Bell# Reset Sensors Area Relays# Area Armed # Fail to Close # Watch Mode# Area Fault # Force Armed# Duress Relay # Perimeter Fault# Silent Alarm AC FailurePasscode or Token Worksheet Passcode Tamper User GroupsPasscodes User Group WindowReporting and Logging User passcode User token or card### Passcode Default Selection 0, 1 toUser ### ### User Group### Mstr Crd Data ### Name### Mstr Site ### SU1 through SU3 SitePoint Index Point Index## Type ## Type Description On next Disarmed is Yes Program Point Response asPoint Responses Applications for Point Responses 9, D, and EHour Points ## Entry Delay## Pt Response Example of Controlled point## Silent Bell ## Ring Until Restored## Entry Tone Off ## Audible After 2 Failures## Invisible Point Point Response ## Buzz On FaultKeypad for any fault condition while the point Regardless of the armed state . The buzz## Display as Device ## Watch Point## Relay Response Type ## Local While Disarmed## Local While Armed ## Disable Restorals## Force Arm Returnable ## Bypassable ## Bypass ReturnableA# Auto Close prompt ## Defer Bypass Report ## Swinger Bypass## Report Bypass at Occurrence ## Cross Point## Resettable ## Alarm Verify## Fire Point ### Point Index ## Alarm AbortPoint Number Parameter Abort Window### Area Assign ### Debounce### Point Text ### Relay### Relay Codes/Relays CMD9 Point Index CMD7 Point IndexCMD7 Relay CMD9 RelayWindow Windows# Sunday # Wednesday # Monday# Tuesday # Thursday# Open Window Start Default Selection Hhmm hours and minutesDisable O/C in Window is programmed Yes # Open Window Stop# Close Early Begin Programming to Link Two Days over Midnight# Close Window Start # Close Window Stop# Area 1 through # Xept Holiday# Holiday Holiday Indexes for O/C WindowsOpening and Closing Windows Worksheet Normal Store HoursDelivery Schedule User Windows #UW# User Group Monthly Auditor’s ScheduleUW# Sunday UW# Group EnableUW# Group Disable UW# MondaySchedules Skeds ## Area 1through # Bypass Max setting## Point Number To 128 for D9412GV3 To 64 for D7412GV3 ## Relay NumberSelections Blank ## Relay Number prompt definesIf Expand Test Report in Phone ## Defer Test## Hourly Report ReportCmd Center and Custom Func ## Cmd Center## Custom Func ## Access Ctl Level # Command Center Keypad ThisAccess Control Level On This Sound Watch Tone atUnlock Door This function Default Selection To 24, 28 Access Control Level OffAccess Authority Events ## Door 1 throughNo Entry Events On Default Selection To 24, 28 Access Authority EventsNo Entry Events Off D9412GV3/D7412GV3 Program Entry Guide 4.0 Schedules Skeds ## Monday ## Time## Date ## TuesdayDate Holiday Indexes## Holiday # Holiday Index #RPS Requirements Enable SDI AutoIntroduction SDI AutomationSDI RPS Parameters Status RateRPS Address Verification Configuration for RPS Over NetworkAnswer RPS Over Network Entered in RPS IP AddressCommand 43, Remote Program Command 43 Flow Chart D1265 RPS IP Address # Default Selection 0.0.0.0 toRPS Port Number Path # IP Address Enhanced CommPath # Port Number Example of Heartbeat Default Selection 0, 5 to 65535 secPath # Poll Rate  Path # Poll Rate is set to 120 secD1260 Poll Rate Timeline Path # Ack Wait SDI RPS/Enhanced Communications ConfigurationDefault Selection 5 sec to 65535 sec Path # Retry CountSupervise SDI Route Group ParametersRG# Same Network Receiver Secondary Ambush Code Early Ambush TimerFire Summary Sustain Fire Supervision Restoral TypeSwinger Count Crystal Time AdjustPasscode Length Remote WarningPerimeter Relay Default Disabled Selection Disabled or US CalendarCross Point Parameters Early Armed RelayDoor # Door ProfileCross Point Time # Entry Area ## Custom Function Default Selection To 127, 129 to 2470 to 75 on D7412GV3#CC#Scope # Door Point# Auto Door? # Interlock Point# Fire Unlock? # Card Type Strike Profile# Disarm on Open? # Strike Time# Deactivate On Open? # Buzz Time# Extend Time # RTE Shunt Only?# REXShunt Only? # Access Granted?Event Profile # No Entry?# Enter Request? # Exit Request?SIA CP-01 Quick Reference Programming the Control Panels for SIA CP--01 CompliancePhone Parameters Power SupervisionPhone RoutingKeypad Command Center Assignment50 Area Relays Command 7 and Command 104 101140 143 145Bosch Security Systems, Inc Perinton Parkway Fairport, NY
Related manuals
Manual 76 pages 25.33 Kb

D9412GV3 specifications

The Bosch Appliances D9412GV3 is a perfect blend of functionality and innovation, designed to meet the needs of modern households. This dishwasher is part of Bosch's reputation for creating high-quality, energy-efficient home appliances. With a sleek design and advanced technology, the D9412GV3 stands out in the crowded market of dishwashers.

One of the main features of the D9412GV3 is its remarkable efficiency. With an Energy Star rating, this model is designed to minimize water and energy consumption while still delivering exceptional cleaning performance. The EcoSense technology optimizes water usage, ensuring every wash cycle is both effective and economical, making it a responsible choice for energy-conscious consumers.

The dishwasher offers a spacious interior, capable of accommodating large loads. Its flexible rack system includes adjustable tines and folding platforms, making it easy to fit various dish sizes, from pots and pans to delicate glassware. Additionally, the third rack feature provides extra space for utensils and smaller items, enhancing its capacity and versatility.

In terms of cleaning power, the D9412GV3 is equipped with the PrecisionWash system. This cutting-edge technology features intelligent sensors that continuously scan and check the load, adjusting the wash cycle as needed for optimal results. Coupled with the 40 dBA noise level, it ensures that the dishwasher operates quietly in the background, so you can enjoy your home without disruptive sounds.

Another standout characteristic is the PureDry technology, an integrated drying system that uses a condensation process to gently dry dishes without the need for extra heat. This not only protects sensitive items but also saves energy, further enhancing the appliance's eco-friendly nature.

Ease of use is a priority for Bosch, as seen in the D9412GV3's user-friendly controls. The intuitive interface allows for selecting various wash cycles and options, including Heavy, Auto, and Quick options, catering to different cleaning needs. Additionally, the Time Delay feature provides the flexibility to set the dishwasher to run at a later time, great for aligning with your schedule.

In summary, the Bosch D9412GV3 combines innovative technologies with a user-centered design to deliver a top-tier dishwasher experience. Its energy-efficient operation, spacious interior, and advanced cleaning features make it an excellent choice for any kitchen, ensuring spotless dishes with minimal effort. With Bosch's commitment to quality, the D9412GV3 stands as a reliable and stylish addition to any modern home.
Top Page Image Contents