Bosch Appliances D9412GV3 manual ## Buzz On Fault, Point Response

D9412GV3/D7412GV3 Program Entry Guide 3.0 Points

EN 95

P## Buzz On Fault

	Default:		0
	Selection:		0 to 3
	Selection	Operation for Controlled Points		Operation for 24-hour, Fire and Aux AC
			(Point Types 1, 2, and 3)	Supervision Points (Point Types 0 and
				11)
0			The point buzzes at the keypad only if it enters	Same as operation for controlled points
			into the trouble condition indicated in the P##
			Point Response.
1			The point generates a Buzz Until Restore at the	The point generates a Buzz Until Restore at
			keypad for any fault condition while the point	the keypad for any fault condition
			is disarmed. The buzz continues until the point	regardless of the armed state. The buzz
			restores and the user acknowledges the	continues until the point restores and the
			condition using a passcode or COMMAND 4.	user acknowledges the condition using a
			The point must be normal before the user can	passcode or COMMAND 4. The point must
			silence the buzz.	be normal before the user can silence the
				buzz.
2			The point buzzes at the keypad for any fault	The point buzzes at the keypad for any fault
			condition when the point is disarmed. The	condition regardless of the armed state.
			user can silence the buzz before the point	The point does not need to be normal before
			returns to normal.	the user can silence the buzz.
3			The point buzzes at the keypad for any fault	The point buzzes at the keypad for any fault
			condition when the area is disarmed. The user	condition regardless of the armed state.
			cannot silence this buzz, but it silences	The user cannot silence this buzz, but it
			automatically when the point is restored. If the	silences automatically when the point is
			fault condition results in a trouble response, the	restored. If the fault condition results in a
			keypad continues to buzz even after the user	trouble response, the keypad continues to
			acknowledges the condition if the fault is still	buzz even after the user acknowledges the
			present.	condition if the fault is still present.

Points bypassed (by the user, Sked, Swinger Bypass, or RPS) do not generate a Buzz On Fault condition at the keypad.

The buzz does not automatically stop when the point is restored when using Option 1 or 2. The user must acknowledge the buzz before the buzz stops. However, when using Option 3, the buzz stops automatically when the point restores to normal without user intervention.

If a point with the type of 11 Aux AC Supervision is bypassed, 24 HOUR PT BYPASSED is shown on the keypads.

Bosch Security Systems, Inc. 10/11 F01U170807-02