Maintenance and cleaning

1800129574 GV69XX E0 A11_110x154 18/04/13 15:59 Page23

Vertical steam ironing

•Set the iron temperature dial and the steam flow adjustment dial (according to model) to the max. position.

•Hang the garment on a coat hanger and hold the fabric slightly taut with one hand. As steam is very hot : never attempt to remove creases from a gar- ment while it is being worn, always hang garments on a coat hanger.

•Press repeatedly on the steam control button - fig.6.(on the iron handle) moving the iron from top to bottom - fig.7.

For fabrics other than linen or cotton, hold the iron a few centimetres from the garment to avoid burning the fabric.

Filling the boiler during use

Never unscrew • VERY IMPORTANT : Before opening your boiler, ensure that there is no more steam left inside by pres- the boiler cap sing the steam control button - fig.6 located on the handle of the iron and keep it pressed down until while it’s still there is no more steam.

steaming. • Stop the steam station by pressing the on/off switch and disconnecting the plug.

•Slowly unscrew the boiler cap.

•Using a water jug, fill with maximum 1 litre of water.

•Fill the boiler fig.4, taking care that the water does not spill over. If this occurs, remove the excess water.

•Replace the boiler cap, screwing on tightly, reconnect your steam station to the mains, and switch it on.

•Wait until the boiler heats up. After approximately 8 minutes or when the steam ready indicator light comes on (according to model), the steam is ready.

Storing the steam station

•Warning: do not touch the soleplate while still hot.

•Fold the carrying arm down onto the iron until it clicks into position, ensuring that your iron is safely locked onto its housing (depending on model).

•Store the electrical cord in its storage place - fig.8.

•Storing the steam cord - fig.9.

•Leave the iron (and the iron rest) to cool down for 1 hour before storing it away.

Before cleaning, ensure that your steam station is unplugged and that the soleplate and the iron rest have cooled down.

Do not use detergent or descaling products for cleaning the soleplate or the base unit. Never hold the iron or the base unit under the tap.

Cleaning the soleplate

• Regularly clean the soleplate with a non-metallic sponge.

Cleaning the unit

• Clean the plastic parts of the appliance occasionally with a soft dampened cloth.

Rinsing the boiler (once a month)

•Be careful : To extend the life of your boiler and to avoid the building up of scale, it is essential that you rinse out the boiler at least after every 10 uses (approximately once

a month).

•Check that the steam station is cold and unplugged for more than 2 hours.

•Using a jug, fill the boiler 3/4 full with untreated tap water- fig.10

•Shake the base unit for a few moments and then empty it completely over your sink - fig.11.

•To obtain the best results, we advise you to repeat this operation.

If your water is hard, increase the frequency. In particular, do not use descaling agents for rinsing out the boi- ler, as they could da- mage it.

Environment protection first !

iYour appliance contains valuable materials which can be recovered or recycled. ‹ Leave it at a civic waste disposal centre.

GV6920C0, GV6920G0, GV6920Z0, GV6920E0 specifications

The Tefal GV6920 series of steam generators, including models GV6920E0, GV6920Z0, GV6920G0, and GV6920C0, represents a blend of advanced technology and user-friendly design, making them a favorite among households looking for efficient ironing solutions.

At the heart of the Tefal GV6920 series is its powerful steam output, which reaches up to 120 grams per minute, allowing for effective wrinkle removal from a variety of fabrics. Coupled with a high-pressure steam function, these models can produce steam pressure of up to 5 bars, ensuring deep penetration into fabrics and making ironing faster and more effective than traditional irons.

One of the standout features of these steam generators is the patented "Easycord" technology that ensures the power cord stays out of the way during ironing. This innovative design not only enhances convenience but also helps in achieving a smoother glide over garments without interruptions.

The GV6920 series is equipped with a large water tank capacity, often reaching up to 1.7 liters, allowing for extended ironing sessions without frequent refills. This is especially advantageous for those with large ironing piles or for households that require frequent ironing. The tank is designed to be easy to refill, and many models feature a removable design for added convenience.

For maintenance, the Tefal GV6920 models incorporate a built-in anti-scale system, which helps maintain the performance and longevity of the appliance by preventing the buildup of limescale in the boiler. This feature is particularly important in areas with hard water.

Safety is another priority for Tefal, as these steam generators include an automatic shut-off feature that activates when the appliance is left unattended for a period. This ensures peace of mind for users who may be concerned about safety when focusing on their ironing tasks.

The ceramic soleplate featured in these models offers excellent glide and durability. Its smooth surface ensures even heat distribution, reducing the risk of fabric sticking or burning.

With these characteristics, the Tefal GV6920 series stands out in the market for its innovative technology and user-orientated design, making ironing a more efficient and enjoyable experience for everyone. As a result, these steam generators are ideal for households aiming to maintain crisp, wrinkle-free clothing with minimal effort.