HP Ethernet BL-c manual Port names, VLANs, STP, trunking default settings, Stp

Category	Specification
100Base-TX	Two Pair or Four Pair UTP Category 5 (100 m)
	EIA/TIA-568 100-ohm STP (100 m)
1000Base-T	Four Pair UTP Category 5e (100 m)
	EIA/TIA-568 100-ohm STP (100 m)
10 Gb multimode fiber cable	62.5/125 or 50/125 microns
10 Gb singlemode fiber cable	9/25 micron
10 Gb CX4 copper cable	Use only these approved HP cables:
	• HP BLadeSystem c-Class .5m 10-GbE CX4 cable (PN 444477-B21)
	• HP BLadeSystem c-Class 1m 10-GbE CX4 cable ( PN 444477-B22)
	• HP BLadeSystem c-Class 15m 10-GbE CX4 cable (PN 444477-B27)
Number of ports per switch:	16 x 1000-Mb/s ports dedicated to the server blade for switch
	communications
	1 x 10 Gb/s ports dedicated to communications between switches that are
	inserted in ports 1 and 2, 3 and 4, 5 and 6 or 7 and 8
	4 x 10Base-T/100Base-TX/1000Base-T RJ-45 ports
	1 x serial RS-232 DB-9 rear panel management serial port
	2 x XFP 10 Gb SR/LR transceivers
	1 x CX4 10 Gb/s

Port names, VLANs, STP, trunking default settings

These default settings apply to all ports:

•Speed—Autonegotiate

Port 18: speed—100, auto—off

Port 19: speed—10000, auto—off

Port 20: speed—10000, auto—off

Port 21: speed—10000, auto—off

Port 22: speed—auto

Port 23: speed—auto

Port 24: speed—auto

Port 25: speed—auto

•PVID—1

•Tag (Y/N)—N

•VLAN Name—Default VLAN

Port type	Port number	Port name	STP
Server	1	Downlink1	Disabled
Server	2	Downlink2	Disabled
Server	3	Downlink3	Disabled

Technical specifications 32