HP OneView for Microsoft System Center HP BladeSystem Management Pack v 1.x for System Center

HP BladeSystem Management Pack (v 1.x) for System Center

NOTE: This management pack is not required if you are using the HP BladeSystem Management Pack (v 2.0 or later) for System Center.

Category	Support
System Center Products	The SCOM environment must have one of the following
	Microsoft System Center products available:
	•	Operations Manager 2007
	• Operations Manager 2007 SP1
	• Operations Manager 2007 R2
	•	Operations Manager 2012
	• Operations Manager 2012 SP1
	• Operations Manager 2012 R2
Operating Systems	Not applicable for managed enclosures.
ProLiant Support Pack	Not required.
Hardware Dependencies	The following HP BladeSystem c-Class enclosures are
	supported for management:
	• HP BladeSystem c3000 Enclosure
	• HP BladeSystem c7000 Enclosure
	HP recommends Onboard Administrator firmware version
	4.0 or greater.
Other Dependencies	The following management packs must be imported:
	• HP ProLiant Server Management Pack for System Center

The following HP SCOM Management Packs features must be installed in the SCOM environment:

• HP BladeSystem Enclosure Monitor Service

• HP BladeSystem Enclosure Monitor Manager

58 HP BladeSystem Management Pack (v 1.x) for Microsoft System Center Support Information