HP Application Software Suite for Microsoft Exchange manual RMExch analyze, Examples

RMExch analyze

SYNTAX

RMExch analyze -s <ExchangeServer> -g <StorageGroup> [-sync] [-f] [-InServ <InServID>] [-domain <DomainName>]

DESCRIPTION

The RMExch analyze command analyzes the existing repository and lists any out-of-sync virtual copies information between the repository and the HP 3PAR Storage System.

PARAMETERS

The following options are supported:

•-s <ExchangeServer> - The name of the exchange server for which the storage group belongs.

•-g <StorageGroup> - The name of the storage group for which the virtual copy timestamp belongs.

•-sync- Automatically updates the repository to match system information. If a virtual copy is missing virtual volumes, it is removed from the repository.

If virtual copies are using an expiration-based policy, any out-of-sync expiration times are updated to match the system expiration time. If virtual copies have a retention time set, any out-of-sync retention times are updated to match the system retention time.

•-f- Forces the command. This option can only be used if the -syncoption is used.

•-InServ <InServID> - Specifies the system to analyze if the backup server is configured for more than one system. If not specified, the default system detected is used.

•-domain <DomainName> - Optional. Specifies the domain to which the Exchange server or storage group belongs.

If this option is not specified, Recovery Manager uses the local domain.

NOTE: Use quotes ("") for names that include spaces.

Examples

The following commands will analyze the existing repository and output any out-of-sync information.

RMExch analyze -s bottlenosed -g sg2

RMExch analyze -s bottlenosed -g "First storage group"

52 Using the Recovery Manager CLI