HP Application Software Suite for Microsoft Exchange manual RMExch config

Page 55

RMExch config

SYNTAX

To change/query the timeout value for NetBackup initialization process detection:

RMExch config -h <WindowsHost> -bktmout [-sec <seconds>]

To change/query the monitoring interval for Remote Copy progress on target server:

RMExch config -h <WindowsHost> -rcintvl [-min <Minutes>]

DESCRIPTION

The RMExch config command will display or change the timeout value for NetBackup initialization process detection for backup operation and the monitoring interval for remote copy progress on target server.

PARAMETERS

The following options are supported:

•-h <WindowsHost> - Specify the Recovery Manager installed Windows host to change or query settings. If the host is in a different domain, specify the FQDN.

•-bktmout- Setup or inquiry for Backup process timeout value to confirm that NetBackup has received the backup request. Valid values are 0 to 86400 seconds. Default is 30 seconds.

•-min<Minutes> - This is optional. Specifies the number of minutes.

•-sec <Seconds> - This is optional. Specifies the number of seconds. This option can only be used if the -bktmoutoption is also specified.

•-rcintvl- Setup or inquiry for Remote Copy process monitoring interval. Valid values are 3 to 15 minutes. Default is 3 minutes.

Example

The following command will change Remote Copy monitoring interval to 10 minutes.

RMExch config -h Grampus -rcintvl -min 10

Recovery Manager Commands 55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents User’s Guide Acknowledgments Contents Using the Recovery Manager GUI Configuring Backup SoftwareRefreshing All Virtual Copies Creating a Backup of a Virtual CopyScheduling Automatic Virtual Copies Automating Tasks Mounting a Virtual Copy Unmounting a Virtual CopyServer Virtualization Environments Rapid Backup and Recovery for ExchangeRemote Copy for Recovery Manager TroubleshootingRelated Documents IntroductionTypographical Conventions Introduction AdvisoriesRecovery Manager Requirements Overview of Recovery ManagerSystem Requirements Features Supported Running Recovery Manager on a Japanese OSOverview of Recovery Manager Microsoft Volume Shadow Copy Service Features Not SupportedFeatures Not Supported Supported VSS Components How VSS Works with Exchange Recovery Manager LayoutHow VSS Works with Exchange Single Host Backup Configuration Centralized Backup ConfigurationRecovery Manager Layout CCR Backup ConfigurationTwo HP 3PAR Storage Systems, One Site Multiple Domain Backup ConfigurationsExchange Servers Backup ServerRemote Copy Backup Server Server RelationshipsBackup Server Installation and DeinstallationUpgrading to Recovery Manager for Exchange Installing Recovery ManagerVerifying the Installation Verifying the InstallationUnderstanding the Registry Editing the Registry Deinstalling Recovery ManagerEnvironment Variables Deinstalling Recovery Manager Configuring the Database Configuring Recovery ManagerConfiguring Recovery Manager Configuring the Provider Configuring Mount FunctionalityConfiguring Recovery Manager for CCR Grouping Volumes into Autonomic GroupsRegistering Domains Configuring Multiple DomainsVolume Sets Multiple Domain RequirementsUnregistering a Domain Modifying Domain CredentialsManaging Domain Components Overview Configuring Backup SoftwareConfiguring Symantec NetBackup Server component is installedSetting Up the HP Data Protector Backup Specification Configuring HP Data ProtectorRequirements Using HP Data Protector Using Your Backup SoftwareSetting Up HP Data Protector Cell Manager Access Using Symantec NetBackupOverview of the Recovery Manager GUI Using the Recovery Manager GUIStopping the GUI Starting the GUIManaging Domains Working in Multiple Domains Setting the Recovery Manager Policy ConfigurationHow Recovery Manager Policies Work Registering the ServerExpiration-Based Policies Numeric-Based PoliciesSetting the Recovery Manager Policy Configuration Setting Recovery Manager PoliciesRetention Time Restrictions Modifying the Time Constraints for a Virtual Copy Configuring Email NotificationsCreating Virtual Copies of Storage Groups Deleting Email ConfigurationsHow Virtual Copy Creation Works Processes during Virtual Copy Creation Manually Creating a Virtual Copy of a Storage GroupProcesses after Virtual Copy Creation Manually Creating a Remote Virtual Copy of a Storage Group Creating a Virtual Copy of an LCR-Enabled Storage GroupCreating Remote Virtual Copies of Storage Groups How Remote Virtual Copy WorksCCR Virtual Copy on Passive Node Creating a Virtual Copy of a CCR-Enabled Storage GroupOption Description CCR Virtual Copy on Active Node PrimaryScheduling Automatic Virtual Copies Automating TasksScheduling Automated Tasks with Task Scheduler Managing Automated Tasks with Task Manager Refreshing All Virtual Copies Mounting a Virtual CopyUnmounting a Virtual Copy Refreshing Virtual Copy InformationRefreshing a Specific Virtual Copy Manually Creating Backups at the Storage Group LevelBacking Up a Virtual Copy Refreshing All Virtual Copies for a Specific Storage GroupYou are using an expiration-based policy, or Creating Backups at the Storage Group Level for CCRYou are using an expiration-based policy, or Creating a Backup of a Virtual Copy Scheduling Automatic Backups at the Storage Group LevelScheduling an Automatic Backup of a Virtual Copy Restoring a Storage Group with Volume Restore Restoring a Storage Group with File Copy RestoreRestoring from a Virtual Copy Analyzing the Repository Restoring a Volume or Directory from a Media BackupManually Analyzing and Synchronizing the Repository Removing Removed Virtual Copies Validating a Virtual CopyRemoving Virtual Copies Removing Available Virtual CopiesViewing Event Message Descriptions Recovery Manager for Exchange Command Line Interface CLI Using the Recovery Manager CLIRecovery Manager for Exchange Command Line Interface CLI Recovery Manager CommandsRMExch analyze Using the Recovery Manager CLIExamples Recovery Manager Commands RMExch backupExample Default is System Drive\3parsnapshotRMExch config RMExch create Recovery Manager Commands RMExch create -s bottlenosed -g sg2 RMExch deletebackup RMExch display RMExch displayDomain RMExch listbackup RMExch ModifyDomain RMExch mount RMExch peer RMExch policy RMExch policy -s bottlenosed -g first storage group -i 10 -r RMExch portconfig RMExch rcstatus RMExch RegisterDomain RMExch remove RMExch report RMExch repository RMExch reset RMExch restore Examples ParametersRMExch setvc RMExch create commandRMExch unmount RMExch UnRegisterDomain Scheduling Virtual Copies with Windows Task Scheduler Running Recovery Manager as a Scheduled JobScheduling Virtual Copies using the Recovery Manager GUI RMExch validateRMExch create -s Exchange Server 1 -g storagegroup3 Running Recovery Manager as a Scheduled JobKey Microsoft Exchange File Types Rapid Backup and Recovery for ExchangeBackup Rapid Backup and Recovery for ExchangeRecovery Procedures Recovery ProceduresAdvantages of Using Recovery Manager Point-In-Time RecoveryFrom the Cluster Administrator, take the Disks offline Volume Promote Point-In-Time RecoveryContinuous Copy Replication Clusters Point-Of-Failure RecoveryPoint-of-Failure Recovery for File Copy Restore Single Copy ClustersPoint-of-Failure Recovery for Volume Restore Single Mailbox RecoveryRestoring a Mailbox from a Backup to a Recovery Server Rapid Backup and Recovery for Exchange How Recovery Storage Groups Operate Using the Recovery Storage Group FeatureCreating a Recovery Storage Group Restoring a Mailbox Store to the Recovery Storage Group Additional Documentation Additional DocumentationRemote Copy for Recovery Manager Remote Copy for Recovery ManagerSynchronous Mode Remote Copy Asynchronous Periodic Mode Remote CopySupport for GeoCluster for Microsoft Windows Setting Up Remote CopySetting Up Remote Copy Support for Remote Copy Modes and PoliciesRecovering a Storage Group from a Remote Copy Backup Server Setting Up Remote Copy Volume Groups for Storage GroupsVMWare and Egenera Server Virtualization EnvironmentsVMWare and Egenera Troubleshooting TroubleshootingKnown Issues Known Microsoft IssuesTroubleshooting Suggestion RMExch analyze -s exchange server -g storage group Regsvr32 C\Windows\system32\msclus.dll Troubleshooting Event Messages Local configuration file Event ID Error Message 3112Backup server RME3126 Error Could not deleteIf NetBackup is included in environment Event ID Error Message 3164RME3176 Error Verification has Command on this snapshotBefore running restore Event ID Error Message 3204Storage group share volumes. Please Unmount the shared volumes beforeInServ Storage System connection setup Removing this configuration3806 3PARVSS3806 Error Unable to read 3807 3PARVSS3807 Error Unable to readMake sure you have entered the right Event ID Error Message 3813 3PARVSS3813 Error Unable to get3PARVSS3814 Error Unable to find 3PARVSS3816 Error Unable to findAllowable volumes Event ID Error Message 3817 3PARVSS3817 Error VSS ProviderLog level setup Storage System configuration entryCommand Event ID Error Message Description/Action 5054An error 5055 3PARVSS5055 Error Token Invalid5063 3PARVSS5063 Error Could not query Event ID Error Message Description/Action 5062Unable to access registry for the specified key Permission to access itRME5108 Error The VSS Writer Event ID Error Message 5103 RME5103 Error The VSS WriterRME5104 Error The VSS Exchange From the command line. To put it into aTo hold I/O writes. Try again when Event ID Error Message 5123RME5126 Error The creation of a RME5127 Error a backup for sameValid license Event ID Error Message 5134New license 5145VSS Provider does not appear to be installed Event ID Error Message 5146RME5147 Error Cannot remove a Not appear to be installed. You cannotRME5162 Error Unable to get Event ID Error MessageRME5159 Error Maximum number Volumes exceededVolume Name is currently exposed to Snapshot volumeServer install location from registry Try performing recovery operationsRME5199 Error Remote copy group Event ID Error Message 5195Copy command for group Remote Copy Copy registered volumes informationReady for sync Notification command for remote copy CopyNeed to check the firewall settings Active DirectoryCould not access the HP 3PAR Storage System Event ID Error Message 5438DataProtector command error Due to invalid username or password
Top Page Image Contents