HP Application Software Suite for Microsoft Exchange manual Parameters, Examples

NOTE: Use quotes ("") where spaces are included.

NOTE: If the restore is directed to the original location, ensure the original location is still valid.

NOTE: Symantec NetBackup software is case sensitive. Make sure all information entered pertaining to the policy is with the exact case.

NOTE: Make sure the Symantec NetBackup software's bin directory is in the system search path for this command to run.

NOTE: When a volume promote is executed on a passive node in a CCR setup, the RMExch restore command usage will be displayed if the CCR nodes are managed by single backup server. Otherwise, a proper error message is displayed.

Example

The following command will perform a restore of a virtual copy 020405162103 from Netbackup media to drive J:\.

RMExch restore -s bottlenosed -g sg2 -t 020405162103 -p test -m bottlenosed -a J:\

Parameters

For FILECOPY and VOLUME RESTORES

The following options are supported:

-s <ExchangeServer> - The name of the Exchange server for which the storage group belongs. -g <storagegroup> - The name of the storage group for which the timestamp belongs.

-t <Timestamp> - The timestamp of the virtual copy to restore.

<-filecopy -promote>- Specify whether to perform a file copy restore or a volume promote restore.

-noemail- Optional - Do not send an email notification even if configured for this operation.

-domain <DomainName> - Optional. Specifies the domain to which the Exchange server or storage group belongs. If this option is not specified, Recovery Manager uses the local domain.

NOTE: Use quotes ("") where spaces are included.

EXAMPLES

The following command will perform a restore of a virtual copy with the timestamp 020405162103 to original database location:

RMExch restore -s bottlenosed -g sg2 -t 020405162103 -filecopy

The following command will perform a volume restore of an unmounted virtual copy with the timestamp 020405162103 to the original database volumes:

RMExch restore -s bottlenosed -g sg2 -t 020405162103 -promote

76 Using the Recovery Manager CLI