HP 800 manual Print is Completely Blank, Front Panel Options Other Index

The file may be too large for the printer's memory.

You can install extra memory in your printer, see Memory.

Output Contains Only a Partial Print

Printer

Introduction	Media & Ink	Solutions	Front Panel	Options	Other	Index
Solving Problems	Image Quality	Ink Supply	Media Problems	Image Error	Other Problems	Getting Help
	Problems	Problems

Print is Completely Blank

If the front-panel Graphics language setting is Automatic (the default), try the other settings: (HP-GL/2 for an HP-GL/2 file, etc., and send the file again.

• Did you press Cancel or Form Feed and Cut before all the data was received by the printer?

If so, you have ended the data transmission and will have to print the page again (you normally don't need to press Form Feed and Cut to unload the print).

• The I/O Setup > I/O Timeout setting may be too short. From the front-panel menu you can increase the I/O Timeout setting to a longer period and then send the print again.

￿

•

• There may be a communications problem between your computer and the printer. Check your interface cable.

• Check to make sure that your software settings are correct for your current page size (e.g., long-axis prints).