HP 800 manual How to define Palette a

Introduction	Media & Ink		Solutions		Front Panel		Printer			Other	Index
							Options
Page Format		Setting Page Size in the		Image Appearance				Print Management			Printer Configuration
		Front Panel					￿
How to define Palette A
The following steps explain how to define Palette A.
	Instructions									Then Press:
						Select (using the			keys)
1.						Set-up menu				Enter
2.	Select Palette A					HP-GL/2				Enter
3.						Define palette				Enter
4.						Palette A				Enter
5.	Select pen to change (in this example 3).					Pen 3				Enter
6.	The current width assigned to this pen is					Width = 0.13mm				Enter
	displayed, for example Width=0.13mm.
7.	Scroll to the width you want.					0.35mm				Enter > Back
	Scroll to Color. The current color
8.	assigned to the pen is displayed (in this					Color = 4				Enter
	example 4)
9.	Scroll to the color you want.					Color = 110				Enter > Back
10.	If both width and color are correct (for					Pen 3				Top
	Pen 3), press Back four times
Repeat this procedure to define each of the other pens.
NOTE:		The palette you have just defined will take effect only when you select it to be the

current palette, as explained on To Select a Palette.