HP 800 manual Media Output Problems, Prints Fall on the Floor After Being Cut

•

•

Prints Do Not Stack Properly in the Media Bin

•

•

•

Introduction Media & Ink		Solutions	Front Panel	Printer	Other	Index
				Options
Solving Problems	Image Quality	Ink Supply	Media Problems	Image Error	Other Problems	Getting Help
	Problems	Problems
Media Output Problems

Prints Fall on the Floor After Being Cut

Make sure the media bin is open.

Do not let more than twenty prints accumulate in the bin.

Make sure roll media is loaded correctly. If the paper is loaded incorrectly, the natural curl of the media may cause it to miss the bin and fall to the floor.

The printer may be too close to the end of the roll. The natural curl near the end of the roll can cause stacking prob- lems. Load a new roll or remove prints manually as they are completed.

If you are mixing prints or nesting sets of several different sizes, you may have stacking problems because of the different sizes of media in the bin.

￿