HP 400N manual Verify that the card was installed correctly

4. Verify that the card was installed correctly.

Location of "I/O CARD READY" message on test page

Print another test page (or configuration plot) and verify that the “I/O CARD READY” message appears.

On the test page, the location of the “I/O CARD READY” message depends on your printer model.

NOTE	If other messages appear, see the troubleshooting
	sections of the HP JetDirect Print Server
	Administrators Guide.
	For HP J4100A (10/100Base-TX), see appendix B
	in this manual for special troubleshooting
	information.

5. Configure the card for network operation.

In most cases, you will use the HP JetDirect software on the CD-ROM. For some printers, you can use the printer’s control panel to configure basic network parameters. See chapter 3 (for HP LaserJet, Professional Series, and DesignJet ColorPro GA printers) or chapter 4 (for HP DesignJet large format printers).

Quick Installation 5