To configure a NetWare frame type
If you have not already done so, enable the IPX/SPX protocol (IPX/ SPX ON) by following the instructions above.
1.Take the printer offline by press the online/offline button 
.
2.Press [Menu] repeatedly until MIO MENU appears.
3.Press [Item]. CONFIGURE MIO appears.
4.Press [Select]. CFG NETWORK NO appears. This message does not mean that you must reconfigure your protocol. It means only that you do not intend to access the network configuration menus.
5.Press [Value] to display CFG NETWORK YES . Then press [Select].
6.Press [Item] until CFG IPX/SPX NO appears.
7.Press [Value] to display CFG IPX/SPX YES. Then press [Select].
8.Press [Item] until FRAME <Frame Type> appears.
To change frame type, press [Value] until the frame type that you desire appears, then press [Select].
9.To activate the printer and save your changes, press the online/ offline button 
.
To complete the print server configuration, see the HP JetDirect software installation guide included with the product.
Configuring Novell NetWare Source Routing (Token Ring Cards Only)
To configure NetWare source routing
If you have not already done so, enable the IPX/SPX protocol (IPX/ SPX ON) by following the instructions above.
1.Take the printer offline by press the online/offline button 
.
2.Press [Menu] repeatedly until MIO MENU appears.
3.Press [Item]. CONFIGURE MIO appears.