HP L25500 manual Handle the substrate

Page 25

NOTE: You can specify the maximum permitted amount of skew at the front panel: select the

icon, then select Substrate handling options > Max skew setting.

5.Wait until the substrate emerges from the printer, as shown in the following graphic.

NOTE: If you have an unexpected problem at any stage of the substrate loading process, see the Maintenance and troubleshooting guide.

6.The printer calibrates the substrate advance.

7.If you are loading transparent substrate without opaque borders, you are asked to enter the width of the substrate and the distance of the right edge from the printer's side plate (as indicated by the ruler on the front of the curing module).

8.The printer indicates that it is ready for printing.

Take care not to cover the fans.

If you have the take-up reel and want to use it, see Use the take-up reel on page 23.

Handle the substrate

ENWW	Load a roll into the printer 21

Image 25

Contents HP Designjet L25500 Printer series Trademarks Legal noticesTable of contents Printer specifications AccessoriesGeneral safety guidelines Safety precautionsIntroduction Electrical shock hazardFire hazard Heat hazardMechanical hazard Ink handling Heavy substrate hazardLabel Explanation Printers main featuresFront view 60-in printer Printers main componentsRear view 60-in printer Front panel Take-up reel motorEmbedded Web Server Main tab Setup tabSupport tab Connection method Connectivity and software instructionsConnect to a network Connection type Speed Maximum cable length Other factorsPrinter setup options Basic setup optionsTurn the printer on and off Change the language of the front panel Restart the printerEmbedded Web Server setup options Change the language of the Embedded Web Server Overview Handle the substrateUse substrate Supported substrate families Load a roll onto the spindleSubstrate family Substrate types Load a roll onto the spindle Handle the substrate Load a roll into the printer Substrate Change loaded substrate Handle the substrate Exceptional procedure roll detached from spindle Normal procedure roll attached to spindleUnload a roll from the printer Load a roll onto the take-up reel Use the take-up reelHandle the substrate Handle the substrate Handle the substrate Enww Handle the substrate Unload a roll from the take-up reel Handle the substrate Store the substrate View information about the substrateAdd a new substrate type Download substrate presetsSummary Substrate family Description Select printer settings and color profileSubstrate family Paper-Solvent Setting Description If too low If too highHP Photorealistic 100 Substrate at the beginning Key Select the number of passesVinyl Check the ink quantity Coalescence, grain Color profiles Color calibrationFaster printing Ink system components Handle the ink systemInk cartridges Printheads Printhead cleaning container Printhead cleaning cartridgeInk funnel Work with ink system components Ink system tipsReplace an ink cartridge Remove an ink cartridge Work with ink system components Insert an ink cartridge Replace a printhead Remove a printhead Handle the ink system Insert a printhead Handle the ink system Handle the ink system Remove the printhead cleaning cartridge Replace the printhead cleaning kitHandle the ink system Insert the printhead cleaning cartridge Replace the ink funnel Handle the ink system Cartridge Order ink suppliesPrinthead Printhead cleanerPrinter states Print optionsChange margins Request the printers internal prints Order accessories AccessoriesName Functional specifications Printer specificationsMinimum Maximum Memory specifications Physical specificationsPower specifications Ecological specificationsAcoustic specifications Environmental specificationsAirflow GlossaryLED Margins IndexOrder Enww