HP L25500 manual Unload a roll from the take-up reel

Page 33

NOTE: If you want to move the printer, first remove the take-up reel sensor and cable housing unit from the foot of the printer stand. Place the sensor and cable housing unit on the printer stand crossbar and use the blue plastic screw to affix the housing unit to the leg of the stand, as shown, while the printer is being moved. When reinstalling the housing unit, make sure that the wheel on the foot of the printer stand is pointing forward.

Unload a roll from the take-up reel

1.On the printer's front panel, select the icon, and then select Substrate unload > Unload roll. The printer advances the substrate to allow for cutting.

2.Lift the loading table to its upright position.

3.Switch the wind-direction switch to the Off position. The switch is in the off position when it is centered (in other words, when the switch is neither in position 1 nor position 2).

Handle the substrate

ENWW	Use the take-up reel 29

Image 33

Contents HP Designjet L25500 Printer series Trademarks Legal noticesTable of contents Printer specifications AccessoriesGeneral safety guidelines Safety precautionsIntroduction Electrical shock hazardHeat hazard Fire hazardMechanical hazard Ink handling Heavy substrate hazardLabel Explanation Printers main featuresFront view 60-in printer Printers main componentsRear view 60-in printer Front panel Take-up reel motorEmbedded Web Server Setup tab Main tabSupport tab Connection method Connectivity and software instructionsConnect to a network Connection type Speed Maximum cable length Other factorsBasic setup options Printer setup optionsTurn the printer on and off Change the language of the front panel Restart the printerEmbedded Web Server setup options Change the language of the Embedded Web Server Handle the substrate OverviewUse substrate Load a roll onto the spindle Supported substrate familiesSubstrate family Substrate types Load a roll onto the spindle Handle the substrate Load a roll into the printer Substrate Change loaded substrate Handle the substrate Normal procedure roll attached to spindle Exceptional procedure roll detached from spindleUnload a roll from the printer Load a roll onto the take-up reel Use the take-up reelHandle the substrate Handle the substrate Handle the substrate Enww Handle the substrate Unload a roll from the take-up reel Handle the substrate Store the substrate View information about the substrateDownload substrate presets Add a new substrate typeSummary Select printer settings and color profile Substrate family DescriptionSubstrate family Setting Description If too low If too high Paper-SolventHP Photorealistic 100 Substrate at the beginning Select the number of passes KeyVinyl Check the ink quantity Coalescence, grain Color calibration Color profilesFaster printing Handle the ink system Ink system componentsInk cartridges Printheads Printhead cleaning cartridge Printhead cleaning containerInk funnel Ink system tips Work with ink system componentsReplace an ink cartridge Remove an ink cartridge Work with ink system components Insert an ink cartridge Replace a printhead Remove a printhead Handle the ink system Insert a printhead Handle the ink system Handle the ink system Remove the printhead cleaning cartridge Replace the printhead cleaning kitHandle the ink system Insert the printhead cleaning cartridge Replace the ink funnel Handle the ink system Cartridge Order ink suppliesPrinthead Printhead cleanerPrint options Printer statesChange margins Request the printers internal prints Accessories Order accessoriesName Printer specifications Functional specificationsMinimum Maximum Memory specifications Physical specificationsPower specifications Ecological specificationsAcoustic specifications Environmental specificationsAirflow GlossaryLED Index MarginsOrder Enww