HP L25500 manual Replace the printhead cleaning kit, Remove the printhead cleaning cartridge

Page 57

9.Close and lock the printer window.

10.The front-panel display confirms that all of the printheads are correctly inserted. The printer starts checking and preparing the printheads. The default routine process, when all printheads are changed, takes up to 18 minutes. If the printer identifies a problem when preparing the printheads, the process takes longer, up to 30 minutes. For a single printhead insertion, the time varies between 10 and 20 minutes. After all printheads are checked and prepared, the printhead realignment procedure runs automatically if substrate is loaded. See the Maintenance and troubleshooting guide.

Replace the printhead cleaning kit

When the front panel prompts you to replace the printhead cleaning kit, you should replace first the printhead cleaning cartridge, then the ink funnel, then the printhead cleaning container.

Replace the printhead cleaning cartridge

A message appears on the front panel when the printhead cleaning cartridge is almost full, and again when it is completely full and must be changed. Follow these precautions when removing a printhead cleaning cartridge:

Be careful not to get ink on your hands. Ink may be on, around and inside the replaced printhead cleaning cartridge.

Always handle and store the replaced printhead cleaning cartridge upright to avoid spilling any ink.

WARNING! Make sure that the printer wheels are locked (the brake lever is pressed down) to prevent the printer from moving.

Remove the printhead cleaning cartridge

1. On the printer's front panel, select the icon, then select Replace PH cleaning kit.

Handle the ink system

ENWW

Work with ink system components 53

Image 57
Contents HP Designjet L25500 Printer series Trademarks Legal noticesTable of contents Printer specifications AccessoriesGeneral safety guidelines Safety precautionsIntroduction Electrical shock hazardHeat hazard Fire hazardMechanical hazard Ink handling Heavy substrate hazardLabel Explanation Printers main featuresFront view 60-in printer Printers main componentsRear view 60-in printer Front panel Take-up reel motorEmbedded Web Server Setup tab Main tabSupport tab Connection method Connectivity and software instructionsConnect to a network Connection type Speed Maximum cable length Other factorsBasic setup options Printer setup optionsTurn the printer on and off Change the language of the front panel Restart the printerEmbedded Web Server setup options Change the language of the Embedded Web Server Handle the substrate OverviewUse substrate Load a roll onto the spindle Supported substrate familiesSubstrate family Substrate types Load a roll onto the spindle Handle the substrate Load a roll into the printer Substrate Change loaded substrate Handle the substrate Normal procedure roll attached to spindle Exceptional procedure roll detached from spindleUnload a roll from the printer Load a roll onto the take-up reel Use the take-up reelHandle the substrate Handle the substrate Handle the substrate Enww Handle the substrate Unload a roll from the take-up reel Handle the substrate Store the substrate View information about the substrateDownload substrate presets Add a new substrate typeSummary Select printer settings and color profile Substrate family DescriptionSubstrate family Setting Description If too low If too high Paper-SolventHP Photorealistic 100 Substrate at the beginning Select the number of passes KeyVinyl Check the ink quantity Coalescence, grain Color calibration Color profilesFaster printing Handle the ink system Ink system componentsInk cartridges Printheads Printhead cleaning cartridge Printhead cleaning containerInk funnel Ink system tips Work with ink system componentsReplace an ink cartridge Remove an ink cartridge Work with ink system components Insert an ink cartridge Replace a printhead Remove a printhead Handle the ink system Insert a printhead Handle the ink system Handle the ink system Remove the printhead cleaning cartridge Replace the printhead cleaning kitHandle the ink system Insert the printhead cleaning cartridge Replace the ink funnel Handle the ink system Cartridge Order ink suppliesPrinthead Printhead cleanerPrint options Printer statesChange margins Request the printers internal prints Accessories Order accessoriesName Printer specifications Functional specificationsMinimum Maximum Memory specifications Physical specificationsPower specifications Ecological specificationsAcoustic specifications Environmental specificationsAirflow GlossaryLED Index MarginsOrder Enww